Pinchy Posted September 4, 2008 Share Posted September 4, 2008 guys will be never a support for 3470mob? If you read through the thread, you'll see the 34xx support is still being worked on by Exile.... there are lots of people waiting for it (including me), but it'll be ready when he has time to finish it. Patience is the key... if you want a FrankenMac, you have to expect that there may be things that don't work right away like this. Link to comment Share on other sites More sharing options...
aser28 Posted September 4, 2008 Share Posted September 4, 2008 HI, I need ati mobility HD 2400 XT driver could you please someone tell me how can i find it?? PLS HELP MEEE...!!!!!!! Link to comment Share on other sites More sharing options...
barnum Posted September 4, 2008 Share Posted September 4, 2008 Hi all, I have an hd3450, do you know if there is any driver ? (beta or not) Thanks, Vincent Link to comment Share on other sites More sharing options...
djnevs Posted September 4, 2008 Share Posted September 4, 2008 Hi all, I have an hd3450, do you know if there is any driver ? (beta or not) Thanks, Vincent Same here. I got the Sapphire ATI HD 3450 ID: 0x95c51002 Thanks in advance. Link to comment Share on other sites More sharing options...
Sony Vaio Posted September 4, 2008 Share Posted September 4, 2008 Is this true? There are HD34XX kexts in 10.5.3? If this is the case, then the 34XX drivers are looking up! Link to comment Share on other sites More sharing options...
buttersb Posted September 4, 2008 Share Posted September 4, 2008 Hi, I've got a Macbook Pro through work but i'm new to the whole osx86 thing. Just bought a Dell Vostro 410, C2Q, with a Radeon 3650 Currently got a dual boot of vista and osx, I used iAtkos4i. the osx install had a driver option for x3000 series, so I picked that, but after installation and reboot I got a screen full of black and white squares. I managed to get it partially working by installing the ATI Radeon HD package, but only by using -x "Graphics Mode"="1920x1200x32@60" when booting. That let me in, but only in safe mode, and only at 1600x1200. Since then I used a package installer to extract and overwrite files, and I managed to get it in 1920x1200 in safe mode, but ony by using the -x "Graphics Mode" line at boot. So, in short, i'm stuck in safe mode with CI in software mode and no QE. If I leave it to boot normally, I just get the black and white squares of death. Anyone have any ideas? Thanks, James Link to comment Share on other sites More sharing options...
shrimpdude Posted September 4, 2008 Share Posted September 4, 2008 Is this true? There are HD34XX kexts in 10.5.3? If this is the case, then the 34XX drivers are looking up! Hm, has anyone tried it yet? That link is like 5 months old. Link to comment Share on other sites More sharing options...
Pinchy Posted September 5, 2008 Share Posted September 5, 2008 Hm, has anyone tried it yet? That link is like 5 months old. I believe there is support for the 24xx, but not the Radeon Mobility 24xx, which is what people all seem to be asking for. LastExile or someone can correct me on this if I am wrong, God knows I make mistakes... LOL It'd sure be nice if ATI/AMD would use different numbering schemes for their Radeon and Radeon Mobility lines as it would sure solve a lot of people's problem with stuff like this. I have a Radeon 3450 PCIe card, and a Radeon Mobility 3470 in my notebook. I can make the 3450 work, but the 3470 is still a no-go unless I want 1024x768 with QE/CI. But I have faith in LastExile, he seems to be able to work magic with drivers. Link to comment Share on other sites More sharing options...
djnevs Posted September 5, 2008 Share Posted September 5, 2008 Can you get the 3450 PCIe to work with QE/CI (and resolution change*) and upload the files? *Optional Link to comment Share on other sites More sharing options...
hookang Posted September 5, 2008 Share Posted September 5, 2008 Ohai everyone ! Update: Aug-30.2008 ATI RADEON HD 3650 AGP installer coming very soon. so 10.5.3 update just releeased so here are the updated kexts and so on for the whole Radeon HD series what needs to be reported back is for 2400 users,2600 and 3650 users for what works and what doesnt report back on dvi on 2400 ! AGP users might need to reinstall AGPgart a updated one check the threads for a newer release for some users that are on nvidia nforce motherboards delete all nvidia and geforce kexts that are the for the video cards, seems like nforce chipset has a conflict with the kexts Need some testers for AGP cards like ATI Radeon HD 3850 Current testing 3690, 3450 Mobility still being researched and still PITA only external monitor oh tho need testers for it on 10.5.3 kexts report back on the installers how they work and so on ! the links will be updated as soon as people reports back on bugs for direct help Join irc.osx86.hu #RadeonHD and give Netkas the thanks ATI Radeon HD 2400pro AGP Device ID: 94c4 Download ATI Radeon HD 2400XT pcie Device ID 94c1 Download ATI Radeon HD 2400pro Device ID: 94c3 Download ATI Radeon HD 2600pro PciE Device ID: 9589 Download ATI Radeon HD 2600 XT Device ID: 9588 Download ATI Radeon HD 2600pro AGP Device ID:9587 Download ATI Radeon HD 2600XT AGP Device ID: 9586 Download ATI Radeon HD 2900XT/PRO Device ID: 9400/9403/9401 Update: Download ATI Radeon HD 3650 Device ID:9598 Download ATI Radeon HD 3850 Device ID:9505 Download UPDATE: Download ATI Radeon HD 3870 Device ID:9501 Download (for users that still need tiger) ATI Radeon HD 2400 series ATI Radeon HD 2600 series ATI Radeon HD 2900 series All PCIe version the AGP Version will be posted soon Download Hi LastExile I installed ATI Radeon HD 3650 Device ID:9598 on kalyway 10.5.2 when reboot not display Monitor to show No signal on black screen and jas 10.5.4 had same problem I think it this driver not support HIS Radeon HD3650 DDR3/512 MB card please help me to solution this problem thank you very much Asus P5Q Intel Q6600 Kingbox 4 GB/800 HIS Radeon HD3650 DDR3/512 MB Link to comment Share on other sites More sharing options...
lastExile Posted September 5, 2008 Author Share Posted September 5, 2008 Hi LastExile I installed ATI Radeon HD 3650 Device ID:9598 on kalyway 10.5.2 when reboot not display Monitor to show No signal on black screen and jas 10.5.4 had same problem I think it this driver not support HIS Radeon HD3650 DDR3/512 MB card please help me to solution this problem thank you very much Asus P5Q Intel Q6600 Kingbox 4 GB/800 HIS Radeon HD3650 DDR3/512 MB Tried DVI or VGA maybe both ? Link to comment Share on other sites More sharing options...
gfoury Posted September 5, 2008 Share Posted September 5, 2008 Tried DVI or VGA maybe both ? Any thoughts on DDC miswiring? My Sapphire 3650 512M works great except I have to swap DVI-D connectors after each boot (and system sleep). One monitor is rotated 90 degrees so it's very obvious that the detected monitors are backwards. Over on the XFree86 radeon driver there's a concept of a ConnectorTable which describes the manufacturer-specific way a particular board has chip pins wired to connectors. I believe part of the point of ATOMBIOS is to contain this kind of information, but given how badly Sapphire has screwed up stuff like the fan table, I don't have much faith that the Windows driver actually trusts the contents of the BIOS. Oh yeah, my displays don't sleep either. It's really...weird to have to remember to turn off a computer monitor. Anyway, thanks for your continuing help here with the drivers. I'm not expecting this to be fixed (I'm happy with the current driver) but the symptom seemed like it might point to a solution to other people's more dire problems. Link to comment Share on other sites More sharing options...
hbala77 Posted September 5, 2008 Share Posted September 5, 2008 Hi I installed the driver package for ATI HD 2400 Pro on ideneb 10.5.4. I also added the preferred resolution in /library/preferences/systemconfiguration/com.apple.boot.plist. I am able to get the desired resolution up to the point where I get a blue flash on the screen and the screen goes dead ( No signal ). This is with the DVI connector. Now from the point I give the boot -v command to the point the screen goes blank I know the screen is in the correct resolution because when I use the info on the monitor it says ( 1920x1200 ). I don't know what happens after than. Any who has got this to run beyond the blue screen or has the solution to how to get further ??? Link to comment Share on other sites More sharing options...
lijay1 Posted September 6, 2008 Share Posted September 6, 2008 Pinchy, are you saying that you actually have a 3450 running with full hardware support? If not, exactly which aspects are working for you, and what install version/method did you use? Link to comment Share on other sites More sharing options...
9inchNail Posted September 6, 2008 Share Posted September 6, 2008 Hey LastExile, First let me say nice work so far with the ati goodness. I also have the new Sony FW and I'm wanting to rock the VaiOsx, it has the HD 3400 series as you know. its the 3470 Anyway i would be willing to donate some money your way if you could get that kext working a little faster. Not trying to be rude, i don't want to be another "YOU SAID A FEW HOURS!" A$$holes that are trying to rush somebody who is taking time out of there own life to develop for a seemingly ungrateful crowd. And i would think other people on this forum would be willing to donate as well. what do you guys think? let me know if you need any spec information or anything that would help ya out....even if it's just a six pack. keep up the good work. Link to comment Share on other sites More sharing options...
lastExile Posted September 6, 2008 Author Share Posted September 6, 2008 So i made some research on the 10.5.5 kexts just to confirm some things that has been changed 1. ATI Radeon HD 2600 Pro Device id: 9589 has fixed white menu bug by apple 2. ATI Radeon HD 3850 Device id: :9505 has fixed white menus bug by apple so what does this mean it means that you most likely can just use natit or EFI String also check device id in info.plist of ATIRadeonx2000.kext before reboot ATI Radeon HD 3850 AGP and 3690 might work without a glitch Maybe 3650 will work like 3850 and 2600pro still needs some research on it im still doing research on 3400 series and work is kicking my ass Link to comment Share on other sites More sharing options...
djnevs Posted September 6, 2008 Share Posted September 6, 2008 im still doing research on 3400 series and work is kicking my ass Swichted back to windows temporarly.. I'd be happy to test the 3450 if you get it :censored2: Link to comment Share on other sites More sharing options...
Pinchy Posted September 6, 2008 Share Posted September 6, 2008 Pinchy, are you saying that you actually have a 3450 running with full hardware support? If not, exactly which aspects are working for you, and what install version/method did you use? Sorry, I have to apologize for that message, I think I was asleep at the wheel when I wrote it. I've got a 3650 PCIe card, not a 3450PCIe card. My mistake, sorry! I find it interesting that Apple has fixed some of the issues with the drivers in 10.5.5... I think they are using our community to fix their problems the same way they did the OpenDarwin project - which shut down because of lack of input from Apple and the general feeling of being exploited for information to fix their problems. And people seem to have this impression that Apple is some sort of messiah to the computer industry, and God knows they are more evil than Microsoft!!! Link to comment Share on other sites More sharing options...
abashadaba Posted September 6, 2008 Share Posted September 6, 2008 Heko me for driver ATI X200 Xpress Link to comment Share on other sites More sharing options...
applehacker Posted September 6, 2008 Share Posted September 6, 2008 Heko me for driver ATI X200 Xpress what the hell? i wasnt trying to be an a$$, i was just disappointed like many others thats all. If we can help in any way, let us know lastexile! Link to comment Share on other sites More sharing options...
hbala77 Posted September 6, 2008 Share Posted September 6, 2008 Hi LastExile - any progress on the ATI HD 2400 PCIe. I have the card working with VGA but no luck with the DVI connector Thx Link to comment Share on other sites More sharing options...
lastExile Posted September 7, 2008 Author Share Posted September 7, 2008 ok So we have a had a tester named bla he got his ATI Radeon HD 3850 working with the 3850 installer for pcie they share the same device id 9505 still needs some testing as far as opengl and so on but so far so good Link to comment Share on other sites More sharing options...
lastExile Posted September 7, 2008 Author Share Posted September 7, 2008 i tried to DVI port vga port not yet try vga and report back Link to comment Share on other sites More sharing options...
Rubber Ducky Posted September 8, 2008 Share Posted September 8, 2008 So is the 3650HD Driver stable? I have a Visiontek overclocked edition on Leo 10.5.2. Id like to try it, but want to know it will work ;D Thanks for any help!! Link to comment Share on other sites More sharing options...
hookang Posted September 8, 2008 Share Posted September 8, 2008 try vga and report back Hi LastExile 1. My card have two DVI ports 2. I Use Adapter convert DVI to vga Don't work (Monitor show no signal) Link to comment Share on other sites More sharing options...
Recommended Posts