lastExile Posted May 29, 2008 Share Posted May 29, 2008 Please note this: THIS DOES NOT WORK ON SNOW LEOPARD NO MATTER WHAT YOU THINK, WISH, WANT, BEG AND BRIBE ME WITH SOMETHING IT SIMPLY DO NOT WORK WITH SNOW LEOPARD THE 10.5.X INSTALLERS PS. ATI Radeon HD Mobility is not working its "SEMI WORKING! only external screen works on 2xxx series in Tiger & Leopard" for more questions i will redirect them to apple support ask them to add in the next revision of macbooks & pro's ATI Radeon HD 6870 mobility. ATI Radeon HD Update: almost the last day in feb CycloneFr has a mde a pkg for all 3870x2 users give big thanks to him ATI Radeon HD 48xx WORKS NOW ! with 10.5.7 kexts and some other tweaks but seems to be a great thing ATI is not dead yet ! If anyone would like to get in direct contact with me you will find me in the #RadeonHD channel @ irc.osx86.hu server Link for the installers untill have the first post fixed Also Give thanks to Netkas, Eps, JaS, ParanoidDK (Paranoid) and all the testers in #RadeonHD channel Snow Leopard Pkgs coming soon for 46xx & 4xxx Mobity: 3650 test Download Snow Leopard 10.6.x ATI Radeon HD 43xx ATI Radeon HD 46xx ATI Radeon HD 48xx NO Tiger support too old Pm if needed a pkg for Tiger ATI Radeon HD 2400 Pro AGP Device ID: 94c4 Download ATI Radeon HD 2400 Pcie Series Device ID: 94c1, 94c3 Download ATI Radeon HD 2600 Pro AGP Device ID: 9587 Download ATI Radeon HD 2600 XT AGP Device ID: 9586 Download ATI Radeon HD 2600 Pro Pcie Device ID: 9589 Download ATI Radeon HD 2600 XT pice Device ID: 9588 Download ATI Radeon HD 2900 Series Device ID: 9400,9401,9402 Download ATI Radeon HD 3450 & 3470 pcie Device ID: Coming soon ATI Radeon HD 3650 pcie Device ID: 9598 Download Intel Download AMD ATI Radeon HD 3650 AGP Device ID: 9596 Download ATI Radeon HD 3690 Device ID: something Coming soon... ATI Radeon HD 3800 series Device ID: 9501, 9505 Download 3850/3870 For all AMD users out there Download New ATI Radeon HD 3870x2 Device ID: something Download Link to comment Share on other sites More sharing options...
borisbadenov Posted May 30, 2008 Share Posted May 30, 2008 I want to first thank you folks for making my life so much easier. I have just installed an ATI HD 2600 Pro pci-e 512mb card (dev id:9589) on my rig (specs below), and using your installer, it was a snap to get my card working 100%. So much nicer than getting my hands dirty in a text editor. Well done lads!!! ps: my card has two dvi ports and with this patch, I can use both ports and run the monitors in extended mode. Link to comment Share on other sites More sharing options...
Tobbz Posted May 30, 2008 Share Posted May 30, 2008 I had problems with my HD 2400XT DevID: 0x94c1 , so many problems that i ditched OSX86, and installed ubuntu on my box. I'm waiting for people to report back on 2400XT's, before i nuke my ubuntu and install OSX86 again, and try your pkg. But thanks for your effort lastExile! It looks like you and Netkas put a lot of work into this, so thumbs up from me. Link to comment Share on other sites More sharing options...
filemonstertest Posted May 30, 2008 Share Posted May 30, 2008 Works ! Not in first place. I still had the black screen on my Dell 30". Then i tried to boot with : "Graphics Mode"="2560x1600x32" (without @60 because this causes my pc to reboot), and it worked ! Full QE/CI !! (but haven't tested dual-display yet...) Thanks A Lot ! P.S.: Does anybody know how to add the "Graphics Mode"="2560x1600x32" command as default ? (so it launches it a every boot) Link to comment Share on other sites More sharing options...
Tobbz Posted May 30, 2008 Share Posted May 30, 2008 I took the chance, and installed ATI Radeon HD 2400XT pcie. I have a DevID 0x94c1 card. It didn't work. Stripes and dots.. screen goes haywire. [EDIT] I use two monitors.. one on the VGA output, and one on the DVI output. If i have both on, both screens goes haywire. If i only have one on the VGA, it gets stock on the grey loading/boot screen. [EDIT2] I need my machine, so i removed OSX86 again.. Sorry, but i just need things to work, so it's back to ubuntu. Link to comment Share on other sites More sharing options...
PM! Posted May 30, 2008 Share Posted May 30, 2008 Working great on HD2600PRO 512 PCIe ! Thank's ! PS: Does it fix the high GPU temp ? Link to comment Share on other sites More sharing options...
lastExile Posted May 30, 2008 Author Share Posted May 30, 2008 i will update some of the installers Link to comment Share on other sites More sharing options...
lastExile Posted May 30, 2008 Author Share Posted May 30, 2008 ATI Radeon HD Series for tiger is coming soon .. ATI Radeon HD 2400pro, 2600pro&xt and some others Link to comment Share on other sites More sharing options...
fauxfur Posted May 31, 2008 Share Posted May 31, 2008 ATI Radeon HD 2600 XT (0x95881002) working great. DVI working (only one tested), QE/CI: ATI Radeon HD 2600 XT: Chipset Model: ATI Radeon HD 2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9588 Revision ID: 0x0000 ROM Revision: 113-B1480A-236 EFI Driver Version: 01.00.236 Displays: DELL 2005FPW: Resolution: 1680 x 1050 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected Thanks a lot! Link to comment Share on other sites More sharing options...
DJLunacy Posted May 31, 2008 Share Posted May 31, 2008 I have two 2600 XT's (512MB) will this allow me to finally use my third LCD? Link to comment Share on other sites More sharing options...
wolfvn Posted May 31, 2008 Share Posted May 31, 2008 I have asus eah3450 256mb pcie 2.0 (id:0x95c51002) it didnt work. Link to comment Share on other sites More sharing options...
MasterRU Posted May 31, 2008 Share Posted May 31, 2008 i have asus radeonHD 3650, i have white menu problem (i am Master in #RadeonHD) Link to comment Share on other sites More sharing options...
sam2062 Posted May 31, 2008 Share Posted May 31, 2008 No work with my Radeon HD3850, blue screen in 10.5.3 Link to comment Share on other sites More sharing options...
roadster Posted May 31, 2008 Share Posted May 31, 2008 Sorry, no joy with 2400XT (0x94c11002). Tried multiple configs (clean install with no graphic drivers whatsoever, with GMA3100 for integrated MB graphics, etc...), always dotted screen. However after screen saver pops in, some chunks of screen make sense so I suspect som memort address offset issue. Does RAM size on graphic card make any difference ? Keep trying ! Link to comment Share on other sites More sharing options...
LowRadiation Posted May 31, 2008 Share Posted May 31, 2008 i'll be the guinea pig for mobile hd2600 Link to comment Share on other sites More sharing options...
lastExile Posted May 31, 2008 Author Share Posted May 31, 2008 will fix some of the installers in a few mins ... adding some older tiger drivers also Link to comment Share on other sites More sharing options...
DJLunacy Posted May 31, 2008 Share Posted May 31, 2008 THANK YOU!!! I upgraded to 10.5.3 and it hosed my video drivers.. Now I Have CE once again I used this installer ATI Radeon HD 2600pro PciE Device ID: 9589 Although what is odd (and this happened with my last set of drivers) I have two of them installed One is reported as 512MB (Main) and the other 256MB. I have my crossfire connector still bridging the two cards. Is there any way to be able to use two additional displays? I have another LCD and a LCD TV that I would like to connect as well? Thank You Link to comment Share on other sites More sharing options...
lastExile Posted May 31, 2008 Author Share Posted May 31, 2008 THANK YOU!!! I upgraded to 10.5.3 and it hosed my video drivers.. Now I Have CE once again I used this installer ATI Radeon HD 2600pro PciE Device ID: 9589 Although what is odd (and this happened with my last set of drivers) I have two of them installed One is reported as 512MB (Main) and the other 256MB. I have my crossfire connector still bridging the two cards. Is there any way to be able to use two additional displays? I have another LCD and a LCD TV that I would like to connect as well? Thank You Post a screenshot of that window .. maybe ! Link to comment Share on other sites More sharing options...
scho Posted May 31, 2008 Share Posted May 31, 2008 Do I need to be running 10.5.3 for this to work? I tried the HD 3850 on a zephyroth 10.5.2 to no avail. Here is my setup: MB: GIGABYTE GA-M57SLI-S4 CPU: AMD Athlon 64 X2 5000+ Black GPU: GECUBE GC-XHD3850PG3-E3R Radeon HD 3850 512MB I get vertical bars after the loading screen. I have to safe boot to get anything to work. Any suggestions (for a 10.5.2 setup) would be appreciated! Link to comment Share on other sites More sharing options...
lastExile Posted May 31, 2008 Author Share Posted May 31, 2008 Do I need to be running 10.5.3 for this to work? I tried the HD 3850 on a zephyroth 10.5.2 to no avail. Here is my setup: MB: GIGABYTE GA-M57SLI-S4 CPU: AMD Athlon 64 X2 5000+ Black GPU: GECUBE GC-XHD3850PG3-E3R Radeon HD 3850 512MB I get vertical bars after the loading screen. I have to safe boot to get anything to work. Any suggestions (for a 10.5.2 setup) would be appreciated! No the installer should work fine on any 10.5.x installs oh tho report back if it doesnt work and i will repack the pkg and correct it Link to comment Share on other sites More sharing options...
DJLunacy Posted May 31, 2008 Share Posted May 31, 2008 Post a screenshot of that window .. maybe ! Here are two screenshots one for each card. If you need any other info I'll be glad to help. Thanks Link to comment Share on other sites More sharing options...
m16 Posted May 31, 2008 Share Posted May 31, 2008 This is unneeded for me with my Radeon 2600XT... going from working on 10.5.1 kaly to working on 10.5.3 kaly nothing changed other then running kalyways comboupdate edit: upon installing these I can actually shut down... for some reason the previous natit didn't let me shut down... Link to comment Share on other sites More sharing options...
lastExile Posted May 31, 2008 Author Share Posted May 31, 2008 Here are two screenshots one for each card. If you need any other info I'll be glad to help.ThanksInteresting hmm I need more feedback from ATI Radeon HD 2400 pcie users Link to comment Share on other sites More sharing options...
miliuco Posted May 31, 2008 Share Posted May 31, 2008 Working great on HD 2600XT 256 PCIe in 10.5.3! Thank's ! Link to comment Share on other sites More sharing options...
analoghell Posted June 1, 2008 Share Posted June 1, 2008 Hello, I have the same issue. Dual 0x9588 cards are detected. The 2nd card shows up with only 256Mb memory and doesn't detect any connected monitors - neither DVI or VGA. As there anyway to force monitor detection? I really want me 3rd screen back and then i'll be 100% happy in mac land!. ac Here are two screenshots one for each card. If you need any other info I'll be glad to help. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts