drho2004 Posted October 14, 2010 Share Posted October 14, 2010 hello all, ive scrolled thought this thread and it seems that the 3850 is NOT supported under SL 10.6.x? can someone please verify before i go ahead and buy a 4870. i have been trying to install vanilla with my P55A-UD4P i7 system. everyting goes well except for the boot using a 3850HD...all i get is a gray screen after the apple logo. i can boot into -x and after adding my device id (9505) into the 3800.kext i am able to change resolutions in safe mode... thanks! Link to comment Share on other sites More sharing options...
kocoman Posted October 21, 2010 Share Posted October 21, 2010 I have used ATI Radeon HD 2600 Pro AGP Device ID: 9587 Download but all I get is black screen with a mouse cursor for VGA port or Seeing Booting Console Log Texts then to "no video signal" on DVI port (DVI to HDMI) Link to comment Share on other sites More sharing options...
Apreeel Posted October 27, 2010 Share Posted October 27, 2010 interested in solution for mobility 3470... Link to comment Share on other sites More sharing options...
ZaaBI_AlonSo Posted October 30, 2010 Share Posted October 30, 2010 is there anything new about hd3650 moblility radeon and snow leopard? Tnxz in advance Link to comment Share on other sites More sharing options...
gremo85 Posted November 1, 2010 Share Posted November 1, 2010 the link for hd mobility 3650 don't work.....where i can get? Link to comment Share on other sites More sharing options...
Hack24 Posted November 3, 2010 Share Posted November 3, 2010 Has anyone gotten 4350 hd ati working? I have a visiontek 512mb. Link to comment Share on other sites More sharing options...
applehacker Posted December 29, 2010 Share Posted December 29, 2010 this project has long been abandoned. Link to comment Share on other sites More sharing options...
Luca Mirci Posted January 1, 2011 Share Posted January 1, 2011 hello, my graphic card is asus ati radeon hd 5700 series (EAH 5750 Formula/2di/1gd5) what driver should i download? And if i download one that doesnt work how do i uninstall it? Thank you. Link to comment Share on other sites More sharing options...
iFIRE Posted January 1, 2011 Share Posted January 1, 2011 is there anything new about hd3650 moblility radeon and snow leopard? Tnxz in advance Hello, for full resulution in ATI HD 3650 PCIe (no QE/CI) , for me work in 10.6.5 all vanilla kexts, edit your ATIX38000.kext witch your device id and this can work. Good Luck!!!!!! Link to comment Share on other sites More sharing options...
deppen Posted January 11, 2011 Share Posted January 11, 2011 i'm using Gigabyte GA-MA78GM-S2H m/b with AMD X3. and not able to find and install kext file for my display ( 1 is on board 3200 hd and other is ati radeon hd 4350 1 gb). Link to comment Share on other sites More sharing options...
lazzy Posted April 18, 2011 Share Posted April 18, 2011 Ati radeon HD 2300 M71. Please tell me how can i install driver for my Ati radeon HD 2300 M71. I wait so long , so many year. please help me. Link to comment Share on other sites More sharing options...
ADHDMedia Posted May 10, 2011 Share Posted May 10, 2011 Hello All I have been trying unsuccessfully for over a week now to enable QE/CI and Resolution Switching in Leopard 10.5.8 with my Sapphire ATI Radeon HD 2400 Pro PCI Version (0x94cc, NOT PCI-e!!!). After browsing endless forums and tutorials, I have determined that there are .kexts and support available for pretty much EVERY HD 2400 Pro model BESIDES the PCI version. I have followed several tutorials and used countless kexts in order to get this working, and I'm about to throw in the towel. After I add my device ID to the ATIRadeonX2000.kext and reboot, all I get is a black screen with a purple and blue pattern. It seems that there is just no support at all for this specific device ID (0x94cc). So my questions: 1) Has anyone ever actually gotten full QE/CI Support and Resolution Switching with this card? 2) If so, where can I find the correct steps and kexts to install in order to get mine working?!? Thanks to all for any help I can get here, I can't imagine that the HD 2400 Pro ONLY works if it's AGP or PCI-e... I know this is kind of a dead issue (all posts I can find on the issue are years old...), but I'm fairly new to 'hackintosh' and would appreciate some instruction. Thanks!! Link to comment Share on other sites More sharing options...
bibendum Posted May 10, 2011 Share Posted May 10, 2011 I can't say for sure, but long ago, when Quartz was a new technology in the OS, Apple specifically excluded PCI graphics cards because the PCI bus did not have the bandwidth. I'd be surprised if that has changed and any workaround will still run up against the same bandwidth limitations... Patrick Link to comment Share on other sites More sharing options...
ADHDMedia Posted May 10, 2011 Share Posted May 10, 2011 I can't say for sure, but long ago, when Quartz was a new technology in the OS, Apple specifically excluded PCI graphics cards because the PCI bus did not have the bandwidth. I'd be surprised if that has changed and any workaround will still run up against the same bandwidth limitations... Patrick Thanks for the info. So if this is the case, would it be safe to say I'm pretty much never gonna get QE/CI with this system since I have no PCIe slots? It's a Dell Dimension 3000 (pretty dated), so I'm pretty much stuck with PCI Would this also be the reason why I can't get resolutions working either? And is there any other information that I could provide that would be helpful? Sorry for all the questions, and thanks again, the information is much appreciated. I'm kinda late discovering this whole hackintosh community, if I'd have known I could put OSX on my PCs I would have given up Windows ages ago... LOL Link to comment Share on other sites More sharing options...
ADHDMedia Posted May 10, 2011 Share Posted May 10, 2011 Hello All: I have been trying unsuccessfully for over a week now to enable QE/CI and Resolution Switching in Leopard 10.5.8 with my Sapphire ATI Radeon HD 2400 Pro PCI Version (0x94cc, NOT PCI-e!!!). After browsing endless forums and tutorials, I have determined that there are .kexts and support available for pretty much EVERY HD 2400 Pro model BESIDES the PCI version. I have followed several tutorials and used countless kexts in order to get this working, and I'm about to throw in the towel. After I add my device ID to the ATIRadeonX2000.kext and reboot, all I get is a black screen with a purple and blue pattern. It seems that there is just no support at all for this specific device ID (0x94cc). So my questions: 1) Has anyone ever actually gotten full QE/CI Support and Resolution Switching with this card? 2) If so, where can I find the correct steps and kexts to install in order to get mine working?!? Thanks to all for any help I can get here, I can't imagine that the HD 2400 Pro ONLY works if it's AGP or PCI-e... I know this is kind of a dead issue (all posts I can find on the issue are years old...), but I'm fairly new to 'hackintosh' and would appreciate some instruction. Thanks!! Link to comment Share on other sites More sharing options...
bibendum Posted May 10, 2011 Share Posted May 10, 2011 Thanks for the info. So if this is the case, would it be safe to say I'm pretty much never gonna get QE/CI with this system since I have no PCIe slots? It's a Dell Dimension 3000 (pretty dated), so I'm pretty much stuck with PCI You know, when it's possible to build a functioning hackintosh for less than $300 bucks, I'm just not sure it's worth it banging your head against the wall trying to get this old equipment working. Would this also be the reason why I can't get resolutions working either? And is there any other information that I could provide that would be helpful? That'd be it. You're basically operating in Safe or VGA mode... Good luck - I enjoy my hackintoshes, but I like this as a hobby. I'd never recommend to anyone that they're better than getting a real Mac. Patrick Link to comment Share on other sites More sharing options...
ADHDMedia Posted May 11, 2011 Share Posted May 11, 2011 You know, when it's possible to build a functioning hackintosh for less than $300 bucks, I'm just not sure it's worth it banging your head against the wall trying to get this old equipment working. That'd be it. You're basically operating in Safe or VGA mode... Good luck - I enjoy my hackintoshes, but I like this as a hobby. I'd never recommend to anyone that they're better than getting a real Mac. Patrick ...which would actually bring me to my next question, which isn't really for this thread but maybe you can point me in the right direction... I just bought an AMD Phenom II X6 with 8 gigs of RAM that I would MUCH rather use, but every time I try to boot from the install disk (iDeneb & iAtkos), I boot with '-v' and it gets past the scrolling text to the grey screen with a mouse and then an endless spinning wheel... I cannot get it to actually load the installer... Any idea where I could get more help for that issue? Obviously this is not the place... (thx again for your time ) Link to comment Share on other sites More sharing options...
bibendum Posted May 11, 2011 Share Posted May 11, 2011 I've never tried to build one with an AMD chip... I've read there are ways but I don't know them. I believe you might need a special kernel, you'll have to research. What GFx card does it have? Patrick Link to comment Share on other sites More sharing options...
lastExile Posted May 14, 2011 Author Share Posted May 14, 2011 Ati radeon HD 2300 M71.Please tell me how can i install driver for my Ati radeon HD 2300 M71. I wait so long , so many year. please help me. there is a thread in this section that is for 2300 series but its not a ATI Radeon HD series its a x1xxx series if i remeber correct but it suppose to work with the method posted in the other thread. Link to comment Share on other sites More sharing options...
zagahlo Posted September 28, 2011 Share Posted September 28, 2011 ATI Radeon HD 3450 & 3470 pcieDevice ID: Coming soon :( :( :( :( I can tell you that the DeviceID is 95C4 Link to comment Share on other sites More sharing options...
Anemos2006 Posted October 30, 2011 Share Posted October 30, 2011 I can tell you that the DeviceID is 95C4 Please tell me how can i install driver for my Ati radeon HD 4600 . I wait so long , so many year.please help me. MARIA Link to comment Share on other sites More sharing options...
lastExile Posted March 4, 2012 Author Share Posted March 4, 2012 Ohai to all i will review and revision the installers in the coming days. I will also add more instructions for older and newer amd radeon hd cards since there are new ones working Link to comment Share on other sites More sharing options...
jabentley Posted March 8, 2012 Share Posted March 8, 2012 Hi there. I have successfully installed Lion 10.7.2 on my rig, but I cannot make my ATI Radeon 2400 XT (0x94c1) work with resolution changing. Its stuck at an odd resolution. Can anyone tell me what I can do? I'm well versed in hackintosh and kext-ing. I've tried adding my device ID to the current ATI2000 kext but it didn't change anything. Please help. I dont want to buy a new card for this computer its just for my parents. Thanks. Link to comment Share on other sites More sharing options...
Guest Posted January 2, 2013 Share Posted January 2, 2013 can u help me with Mountain lion plz ? my graphics card is 3850 and Device id : 9505 Link to comment Share on other sites More sharing options...
rraallvv Posted January 28, 2013 Share Posted January 28, 2013 Is this working with ATI Radeon HD 3200 integrated card? Link to comment Share on other sites More sharing options...
Recommended Posts