Jump to content

ATI Radeon HD pkg installers 10.5.x & 10.6

lastExile

By lastExile,
in ATi

 Share
2,380 posts in this topic

Recommended Posts

GodOfSharing
GodOfSharing
Posted
Posted

Greetings Last Exile:

 

Excellent post. Thanks for the info.

 

A Sapphire Radeon HD 3850 AGP 512 MB Driver Package needed

 

I got the card to work via XXX_x86_10.5.6_Universal_Final_V.2 on an Asus P5PE-VM, DualCore Intel Pentium D, 3000 MHz, ACPI x64-based PC, Intel Springdale-G i865G, 2x1GB ram ddr 400, Sapphire 512MB AGP 3850. The installer GraphicDrivers option doesn't have an AGP selection for the 3850, it appears the selection if for the PCI-E version. I tried various drivers of related cards from the selections and so far only "ATIRadeoHD48x0" would work. But the card is limited like yours. From the System Profiler I get:

 

Bus: PCI (Note should be AGP)

VRAM (Total) 256MB

Vendor: Ati (0x1002)

Device ID: 0x9515

Revision ID: 0x0000

Kernel Extension Info: No Kext Loaded

 

DISPLAY:

(Only available) Resolution: 1024 X 768

Depth: 32-bit color

Core Image: Softeware

Quartz Extreme: Not Supported

 

I used OSX86Tools to enable Quartz GL though the card doesn't show up as a device in hardware drivers. It appears as it should in "View PCI Device/Vendor ID".

 

If anyone has a fix for this card on this OS and board please provide the driver or Kext and instructions on how to install it. I have Kext Helper b7, but have never used it.

 

Thank you.

 

GOS

Link to comment
Share on other sites
daimason
daimason
Posted
Posted
ATI Radeon HD Update: almost the last day in feb

 

CycloneFr has a mde a pkg for all 3870x2 users :D give big thanks to him

 

ATI Radeon HD 48xx WORKS NOW ! with 10.5.7 kexts and some other tweaks but seems to be a great thing

 

ATI is not dead yet ! :P

 

If anyone would like to get in direct contact with me you will find me in the #RadeonHD channel @ irc.osx86.hu server

 

 

Link for the installers untill have the first post fixed

 

 

Also Give thanks to Netkas, Eps, JaS, ParanoidDK (Paranoid) and all the testers in #RadeonHD channel :D

 

 

FAQ: Coming soon

 

Installation guide: Coming soon

 

Uninstall Guide Coming soon

 

Supported Cards: in Progress

 

EFI-Strings:

 

Notes:

 

Mobity: 3650 test Download

 

 

 

Tiger Installers:

Update in Progress ....

 

 

Leopard Installers: Look above (Mediafire B0rked - Not working)

ATI Radeon HD 2400 Pro AGP

Device ID: 94c4

Download

 

ATI Radeon HD 2400 Pcie Series

Device ID: 94c1, 94c3

Download

 

ATI Radeon HD 2600 Pro AGP

Device ID: 9587

Download

 

ATI Radeon HD 2600 XT AGP

Device ID: 9586

Download

 

ATI Radeon HD 2600 Pro Pcie

Device ID: 9589

Download

 

ATI Radeon HD 2600 XT pice

Device ID: 9588

Download

 

ATI Radeon HD 2900 Series

Device ID: 9400,9401,9402

Download

 

ATI Radeon HD 3450 & 3470 pcie

Device ID:

Coming soon

 

ATI Radeon HD 3650 pcie

Device ID: 9598

Download Intel

 

Download AMD

 

ATI Radeon HD 3650 AGP

Device ID: 9596

Download

 

ATI Radeon HD 3690

Device ID: something

Coming soon...

 

ATI Radeon HD 3800 series

Device ID: 9501, 9505

Download

 

3850/3870 For all AMD users out there

Download

 

New ATI Radeon HD 3870x2

Device ID: something

Download

 

 

does any1 know where i can find the download for ati radeon hd3450?

Link to comment
Share on other sites
CrimsonAngel
CrimsonAngel
Posted
Posted
I just installed an AGP ati HD 2400 pro 512MB and I did a clean install of ideneb 1.5.1.

I am able to raise the resolution to the desired setting but the system sort of lagsand QE is not enabled.

also system profiler reads the card as a Radeon HD 2400XT

 

 

I remember on my computer when I installed the nvidia 6600 none of the injectors ever worked so I used an efi string in the universal installer. but the Universal installer doesn't offer one for the 512MB version of the Radeon HD 2400 pro and when I use the 256 version I boot to a blue screen.

 

Does anyone know how I can get quartz extreme to work? Ive read somewhere about changing the frame-buffers to I think megalogin or something like that.

Link to comment
Share on other sites
Toioiz
Toioiz
Posted
Posted

I'm currently using an ATI HD 2400 PCIe card, and installed the lastest software. I'm able to get my native resolution now, and enable Quartz GL, but QE is still showing disabled:ATI Radeon HD 2400 XT:

  Chipset Model:	ATI Radeon HD 2400
 Type:	Display
 Bus:	PCIe
 PCIe Lane Width:	x16
 VRAM (Total):	256 MB
 Vendor:	ATI (0x1002)
 Device ID:	0x94c3
 Revision ID:	0x0000
 ROM Revision:	113-B1480A-236
 EFI Driver Version:	01.00.236
 Displays:
Q2201wb:
 Resolution:	1680 x 1050 @ 60 Hz
 Depth:	32-Bit Color
 Core Image:	Software
 Main Display:	Yes
 Mirror:	Off
 Online:	Yes
Quartz Extreme:	Not Supported
 QuartzGL:	Supported
Display Connector:
 Status:	No Display Connected

 

my device ID is in the ATIRadeon2000.kext, and I've attempted to change it from using "Iago" to "Megalodon", without success. I've attempted these instructions but they don't seem to work either.

 

Any help would be greatly appreciated.

Link to comment
Share on other sites
stewartep
stewartep
Posted
Posted

Hi, I'm running LawlessPPC distro (clean install) (AMD X64). I've got an ATI 2900XT card. I've installed the above drivers for 2900XT. On normal boot up I get disco screen. In safe mode I get "aty_franklin.kext was installed improperly and cannot be used".. I've been trying to get this to work for weeks... I've had enough.. Any ideas before I throw in the towel please?

 

Its greatly appreciated.. :-)

Link to comment
Share on other sites
itsafunkything
itsafunkything
Posted
Posted

disclaimer: there are 100 pages on this thread so i havent read every single reply.

i'm assuming it's better to do a fresh install with no graphics drivers selected and then to install this package?

i'm at work now and i will try this soon as i get home.

i recently bought an ATI Radeon 2600 HD AGP card to try OSX Leopard (since I had no luck getting my ATI Radeon 9600XT to work other than in basic AGP) and so far I got it to work using just the Natit driver. I get Quartz GL Supported, CI Software, but no Quartz Extreme. hoping this package will do the trick. fingers crossed.

Link to comment
Share on other sites
itsafunkything
itsafunkything
Posted
Posted

ok i went home and tried.. and it worked a charm :P

first i installed without any video drivers and the os didn't boot. then i used natit driver and got osx to boot and then installed the driver package. thank you so much for providing this. here are the results..

i have an ATI Radeon 2600 HD Pro AGP but it shows as HD 2600 XT PCI... Anyway...

 

 

ATI Radeon HD 2600 XT:

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCI

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9587

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

BenQ E2200HD:

Resolution: 1920 x 1080 @ 60 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Display Connector:

Status: No display connected

Link to comment
Share on other sites
ram130
ram130
Posted
Posted
ok i went home and tried.. and it worked a charm :)

first i installed without any video drivers and the os didn't boot. then i used natit driver and got osx to boot and then installed the driver package. thank you so much for providing this. here are the results..

i have an ATI Radeon 2600 HD Pro AGP but it shows as HD 2600 XT PCI... Anyway...

 

 

ATI Radeon HD 2600 XT:

 

Chipset Model: ATI Radeon HD 2600

Type: Display

Bus: PCI

VRAM (Total): 512 MB

Vendor: ATI (0x1002)

Device ID: 0x9587

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

BenQ E2200HD:

Resolution: 1920 x 1080 @ 60 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Display Connector:

Status: No display connected

I wonder if the same trick can work for the ATI HD3200...hmmm? :rolleyes:

Link to comment
Share on other sites
  • 2 weeks later...
ole2
ole2
Posted
Posted
any updates for the ATi Mobility RADEON HD 3450???? It would such a great help!

 

EDIT

 

well heres is how to get full Res for the 3450 card! http://www.insanelymac.com/forum/lofiversi...hp/t132491.html

 

it will give you 1980x1200! but no QE/CI/R yet.. Looking forward to it!

 

oh, no, that post is about external monitor ONLY, we are looking after LVDS integrated display usually attached to Mobility ATI one

Link to comment
Share on other sites
deejayy
deejayy
Posted
Posted

I have just done a clean install with iDeneb Lite v8 10.5.8 and used drivers from this thread for ATI Radeon HD 3650 Pci_E

 

 

I have 2 problems:

 

- Resolution is stick at 1024x768

- Fan seems to be spinning on full constantly... i'm guessing this is dangerous for the card

 

Any suggestions here? plz note i have been in IRC and read this whole thread, any suggestions appreciated, thanks ;)

Link to comment
Share on other sites
Ashmodai
Ashmodai
Posted
Posted

I am desperate ... I tried every possible solution on this forum to get my HD2400PRo to work and this thread is the one where I get the best results (at least I got a good resolution of 1920x1200) but still no QE/CI ...

 

What is really strange is that my card is a HD2400PRo and not XT but after having used the installer provided here the System info are showing :

 

ATI Radeon HD 2400 XT:

 

Chipset model : ATI Radeon HD 2400

Type : Display

Bus : PCIe

PCIe Lane Width : x16

VRAM (Total) : 256 MB

Vendor : ATI (0x1002)

Device ID: 0x94c3 (correct for a HD2400PRo no ???)

Revision ID: 0x0000

ROM Revision: 113-B1480A-236

EFI Driver Version: 01.00.236

Displays:

DELL 2405FPW:

Resolution: 1920 x 1200 @ 60 Hz

Depth : 32-Bit Color

Core Image : Software

Main Display: Yes

Mirror : Off

Online: Yes

Quartz Extreme: Not Supported

Display Connector:

Status : No Display Connected

 

If any of you has an idea ... Thanks !!! :)

Link to comment
Share on other sites
庄奇大
庄奇大
Posted
Posted

it`s very weird that i got a blue screen with a movable mouse,and when i press my power button,i can see the system works well,then power off,only can see that for seconds.

i`m using your drivers in my 2600pro pcie in 10.5.7...

could you help me?i`m freaking out..

Link to comment
Share on other sites
BryX
BryX
Posted
Posted
I have just done a clean install with iDeneb Lite v8 10.5.8 and used drivers from this thread for ATI Radeon HD 3650 Pci_E

 

 

I have 2 problems:

 

- Resolution is stick at 1024x768

- Fan seems to be spinning on full constantly... i'm guessing this is dangerous for the card

 

Any suggestions here? plz note i have been in IRC and read this whole thread, any suggestions appreciated, thanks :)

 

 

I am having the same problem with the same setup. I"m running a dell 1737...the fan does stop at times however i am also stuck at 1024x768 resolution. Have you resolved this yet?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...