MGJulius Posted May 24, 2008 Share Posted May 24, 2008 I recently install zephyroth 10.5.2 on my Asus M2NPV-VM AMD machine and i have everything working but the lan. The forcedeth that came on the dvd doesnt include my device id but when i add it in i get a kernel panic and my system crashes. I've tried all the drivers on this thread http://forum.insanelymac.com/index.php?showtopic=12933 and they wont work w/ my device. Now when i installed kalyway there was a newer version called "forcedeth -v" that did work. If anyone knows where to get that online it would be much appreciated. Thanks in advance... - MGJulius Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/ Share on other sites More sharing options...
taga Posted June 5, 2008 Share Posted June 5, 2008 I installed the leoall v3 in asus m2npv-vm and the network does not work, how do I operate the network? thanks Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-772131 Share on other sites More sharing options...
Rhys28 Posted June 20, 2008 Share Posted June 20, 2008 Which version of Kalyway worked??? I have tried 10.5.2 from kalyway, leo4all, and zephyroth (all from the bay...) and got nada on my M2NPV-VM's onboard NIC. I think I can get the driver off the install disc you have that works if I can get ahold of the same one. Sounds like that would make us both VERY happy!! Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-791306 Share on other sites More sharing options...
O_x Posted June 27, 2008 Share Posted June 27, 2008 Hi to everyone! Have a problem with Marvell 88E1116 ethernet, motherboard ASUS M2NPV-VM, Zephyroth 10.5.2 Leopard is installed, but MacOS doesn't even see my device, these are only 2 Built-in-COM ports and FireWire port in network system preferencies and nothing else. So here is my question, what should I do to make MacOS see my network device? Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-798469 Share on other sites More sharing options...
djabdel88 Posted June 27, 2008 Share Posted June 27, 2008 Forcedeth freezes my computer, all the driver, i have tested Zephyroth 10.5.2, Kalyway 10.5.2..; I have a M2N with a Nforce 430 Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-798749 Share on other sites More sharing options...
O_x Posted June 30, 2008 Share Posted June 30, 2008 Problem solved! I installed SKGE.kext (added my device ID in info.plist) and my system saw my ethernet controller. But after reboot i've got kernel panic. I've also solved this problem by booting in -x mode and deleting forcedeth.kext and skge.kext. After that I installed nForceEthernet.kext and got my network up after reboot in normal mode, but also had a problem my system hang deadly when I opened a shared network folder, then I just changed the speed of my controller to 100 Mb/s instead of 1Gb/s. Now everything work perfectly! Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-801100 Share on other sites More sharing options...
Swampfoot Posted July 2, 2008 Share Posted July 2, 2008 then I just changed the speed of my controller to 100 Mb/s instead of 1Gb/s. Now everything work perfectly! How do you change the speed of the controller? Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-803950 Share on other sites More sharing options...
Lord Xenu Posted September 3, 2008 Share Posted September 3, 2008 I finally did it!! I got my Asus M2NPV-VM network interface to work. I use a combination of Forcedeth 0.3 Leopard kext (http://forum.insanelymac.com/index.php?showtopic=12933) & Marvell 88E1116 Ethernet Controller kext (http://forum.insanelymac.com/index.php?showtopic=73317). I used Kalyway 10.5.3 Intel/AMD release for my Mac. Here are the steps which I went through to make the damn thing to work. I downloaded the "forcedeth_0.3_leopard.zip" & "nForceEthernetController.kext.zip" kexts from the above mentioned site. Unpacked the content onto my HDD. I use the "forcedeth/build/Release/forcedeth.kext" & I added "0x026910DE" (under 'IOPCIPrimaryMatch') to both "Info.plist" on the kext file. I also did the same for "nForceEthernetController.kext". Started Kext Helper (http://www.cheetha.net/). Drag and dropped the "forcedeth.kext" to the application, typed in my password & clicked on 'Easy Install'. After running the application the card will be detected by the OS. After running the kext I rebooted my machine. Upon starting mid way, I was welcomed with a kernel panic (this is actually good). Restarted my Mac again & used '-x' switch to start in safemode. I deleted the "forcedeth.kext" file from the "/System/Library/Extensions" folder. I started Kext Helper again & dragged the "nForceEthernetController.kext" onto it & clicked 'Easy Install'. After installation, I shutdown my computer & used the power switch to completely power off the machine. Waited for 2-3 minutes (I made a sandwich in the meantime ) & started the computer back on. Whaddaya know? I got my ethernet up & running!! It's been a week since my ethernet started to work & I haven't had any lockups, kernel panic or any of those nasty stuff. Hopefully it's been helpfull & you can finally use your NIC for internet access. Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-878087 Share on other sites More sharing options...
Silthrim Posted September 3, 2008 Share Posted September 3, 2008 Whoa! That worked for me man! I'm running an EVGA 680i SLI mobo and it worked perfectly! Thank you!! Hopefully it will last! Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-878901 Share on other sites More sharing options...
orel91 Posted September 4, 2008 Share Posted September 4, 2008 WORKS on my M2NPV-VM !!! Thank you very much Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-879272 Share on other sites More sharing options...
thecoolcasanova Posted September 5, 2008 Share Posted September 5, 2008 I finally did it!! I got my Asus M2NPV-VM network interface to work. I use a combination of Forcedeth 0.3 Leopard kext (http://forum.insanelymac.com/index.php?showtopic=12933) & Marvell 88E1116 Ethernet Controller kext (http://forum.insanelymac.com/index.php?showtopic=73317). I used Kalyway 10.5.3 Intel/AMD release for my Mac. Here are the steps which I went through to make the damn thing to work. I downloaded the "forcedeth_0.3_leopard.zip" & "nForceEthernetController.kext.zip" kexts from the above mentioned site. Unpacked the content onto my HDD. It's been a week since my ethernet started to work & I haven't had any lockups, kernel panic or any of those nasty stuff. Hopefully it's been helpfull & you can finally use your NIC for internet access. hey bud...this doesn work for me... tried it thrice.....can you help me...my sys config. is below: ......Plss help me guys...without internet there isnt any use for me to spend on MAC.........thx n advance Motherboard: Asus M2NPV -VM Chipset: 6150 Geforce Nvidia Ram: 2 GB Display Card: Nvidia Geforce 8600GT Processor: AMD athlon 64 X2 Dual core processor 4800+ Network card: Nvidia nforce Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-880941 Share on other sites More sharing options...
Lord Xenu Posted September 5, 2008 Share Posted September 5, 2008 Whoa, great news guys! Glad it worked! @thecoolcasanova: I've sent you a PM. Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-881040 Share on other sites More sharing options...
Atacama Posted September 6, 2008 Share Posted September 6, 2008 Hi Lord Xenu, Thanks for the instructions, worked pretty much to the letter for me (although after doing the easy install of forcedeth.kext hung my PC), other than that minor difference it worked like a charm Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-881392 Share on other sites More sharing options...
Jeremy Visser Posted September 10, 2008 Share Posted September 10, 2008 Awesome stuff! But you know, the forcedeth.kext part was completely unnecessary for me. All I needed to do was delete the existing forcedeth.kext extension (which was preinstalled by my install disc), add the PCI ID to the nForceEthernetControllet.kext, and install the latter kext with Kext Helper. I confirm that you do need to power off the computer for a few seconds. For some reason, the old forcedeth.kext seems to corrupt the state of the ethernet device, and even once you get a working driver, the ethernet's state is all funky. You need to remove the power so it gets back into a sane state. Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-885513 Share on other sites More sharing options...
Mike144 Posted December 13, 2008 Share Posted December 13, 2008 Hey thanks for the help with that I got it working after I pulled out the power cord! however whener I download anything the whole os locks up and freezes and i have to do a hard shutdown. Can this be fixed? also how did you all get the integrated sound working (when I checked it said it was a soundmax HD integrated) thanks EDIT: Ok scratch the audio I got that working with azalia kext, but the internet will let me surf n such but if I try to download anything even just youtube will make it freeze completely. I checked and the forcedeth kext is deleted. Should I just remove the other nforce kext and retry it? Thanks Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-997486 Share on other sites More sharing options...
MonoKulen Posted December 16, 2008 Share Posted December 16, 2008 I finally did it!! I got my Asus M2NPV-VM network interface to work. I use a combination of Forcedeth 0.3 Leopard kext (http://forum.insanelymac.com/index.php?showtopic=12933) & Marvell 88E1116 Ethernet Controller kext (http://forum.insanelymac.com/index.php?showtopic=73317). I used Kalyway 10.5.3 Intel/AMD release for my Mac. Here are the steps which I went through to make the damn thing to work. I downloaded the "forcedeth_0.3_leopard.zip" & "nForceEthernetController.kext.zip" kexts from the above mentioned site. Unpacked the content onto my HDD. I use the "forcedeth/build/Release/forcedeth.kext" & I added "0x026910DE" (under 'IOPCIPrimaryMatch') to both "Info.plist" on the kext file. I also did the same for "nForceEthernetController.kext". Started Kext Helper (http://www.cheetha.net/). Drag and dropped the "forcedeth.kext" to the application, typed in my password & clicked on 'Easy Install'. After running the application the card will be detected by the OS. After running the kext I rebooted my machine. Upon starting mid way, I was welcomed with a kernel panic (this is actually good). Restarted my Mac again & used '-x' switch to start in safemode. I deleted the "forcedeth.kext" file from the "/System/Library/Extensions" folder. I started Kext Helper again & dragged the "nForceEthernetController.kext" onto it & clicked 'Easy Install'. After installation, I shutdown my computer & used the power switch to completely power off the machine. Waited for 2-3 minutes (I made a sandwich in the meantime ) & started the computer back on. Whaddaya know? I got my ethernet up & running!! It's been a week since my ethernet started to work & I haven't had any lockups, kernel panic or any of those nasty stuff. Hopefully it's been helpfull & you can finally use your NIC for internet access. Can someboday please explain me what to do with step 3. I am a total n00b to Apple OSX. I isntalled iDeneb 10.5.5, and I have a Marvell 88E1116 Ethernet Controller on my motherboard. I opened the forcedeth/build/Release/forcedeth.kext with Finder, and Info.plst with TextEdit (if I remeber the name right...it's a "Notepad") and I added the serial 0x...at the end of the line, and I tried to save, but it won't. How can I save the changes I made to a Info.plst file. Or have I missunderstood what shall be done? Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-1001492 Share on other sites More sharing options...
MGJulius Posted December 17, 2008 Author Share Posted December 17, 2008 Holy {censored} im replying to a thread I started 7 months ago o.O Go to the site here and download the nforce lan kext. Install it using Kext Helper It works flawlessly..haven't have had a problem yet. However if you have a dual-core processor you need to install the voodoo 9.5 kernel or you will get funky mouse activity MGJulius Link to comment https://www.insanelymac.com/forum/topic/106675-forcedeth-for-m2npv-vm/#findComment-1002423 Share on other sites More sharing options...
Recommended Posts