Riley Freeman Posted August 12, 2008 Share Posted August 12, 2008 I've restarted after changing the speaker setup but still no dice. I did notice this in Audio MIDI Setup though. Looks like the master volume is set to 0 and not selectable. Can you check yours and see if it looks like this? Link to comment Share on other sites More sharing options...
Riley Freeman Posted August 12, 2008 Share Posted August 12, 2008 Mine is same, now when you click on Configure Speakers, Select 5.1 and (from behind of audio card) swap the wires from Left and Right TO Rear Left and REAR right... and see if works or not (oh yes don't forget your favorite restart...lol) The thing is, this isn't a 5.1 card. I only have a stereo jack for output. No front/rear etc. It's just a basic SB Live Value. It's great these drivers came out so quick. I hope I don't sound impatient or anything. It's just that I'm also juggling ethernet and speedstep issues at the same time Link to comment Share on other sites More sharing options...
McFakeFakerson Posted August 12, 2008 Share Posted August 12, 2008 {censored}...been waiting for these drivers ever since this thread was even made...turns out my Audigy SE isnt compatible LOL!! Link to comment Share on other sites More sharing options...
Dmitrii Posted August 12, 2008 Share Posted August 12, 2008 Cross fingers, reboot and it's work on my spec! Thank you so much!!! Only 8 channel output in audiomidiutility and no input I have 2.1 audio speakers. I not tested ext. module and i hope to this will work. What about remote control and front row, guys? Link to comment Share on other sites More sharing options...
Riley Freeman Posted August 12, 2008 Share Posted August 12, 2008 OK I got it at last! Just selected stereo in speaker setup and set left speaker to channel 3 and right to 4 (in all my frantic clicking I didn't read that you can click on the speaker icon to hear a test sound. duh...). I get sound but it degrades within a couple of minutes. Still, that's a known bug right now. But it works! Link to comment Share on other sites More sharing options...
Oxtie Posted August 12, 2008 Author Share Posted August 12, 2008 Cross fingers, reboot and it's work on my spec! Thank you so much!!! Only 8 channel output in audiomidiutility and no input I have 2.1 audio speakers. I not tested ext. module and i hope to this will work. What about remote control and front row, guys? Dmitrii, try to do what Riley Freeman did set Left speaker to chan3 and Right to chan4 while woofer to 6? try other if didn't work OK I got it at last! Just selected stereo in speaker setup and set left speaker to channel 3 and right to 4 (in all my frantic clicking I didn't read that you can click on the speaker icon to hear a test sound. duh...). I get sound but it degrades within a couple of minutes. Still, that's a known bug right now. But it works! Ah yes, to save yourselves from Restarts Hagar pointed out a temp solution OPEN TERMINAL and type the following (which should give you another 10 minutes.... lol) sudo -s (password) kextunload /System/Library/Extensions/kXAudioDriver.kext (if at this point it says "failed" just repeat the command above) kextload /System/Library/Extensions/kXAudioDriver.kext Link to comment Share on other sites More sharing options...
newbmac Posted August 12, 2008 Share Posted August 12, 2008 Sound from all 5.1 speakers after setting in Audio Midi Setup! I tried changing the channels to direct the sound in the Audio Midi Setup for speakers from the rear to the front For my Soundblaster Audigy 2 ZS the following are the speaker channel mappings Left Front 3 Right Front 4 Center 5 Left Rear 1 Right Rear 2 Subwoofer 6 Link to comment Share on other sites More sharing options...
Oxtie Posted August 12, 2008 Author Share Posted August 12, 2008 Sound from all 5.1 speakers after setting in Audio Midi Setup! I tried changing the channels to direct the sound in the Audio Midi Setup for speakers from the rear to the front For my Soundblaster Audigy 2 ZS the following are the speaker channel mappings Left Front 3 Right Front 4 Center 5 Left Rear 1 Right Rear 2 Subwoofer 6 Yup, I've mentioned it at DH's bug report page but the thing is that after you reboot, it will not sound from all speakers (only the rear ones) Link to comment Share on other sites More sharing options...
Riley Freeman Posted August 12, 2008 Share Posted August 12, 2008 Ah yes, to save yourselves from Restarts Hagar pointed out a temp solution OPEN TERMINAL and type the following (which should give you another 10 minutes.... lol) sudo -s (password) kextunload /System/Library/Extensions/kXAudioDriver.kext (if at this point it says "failed" just repeat the command above) kextload /System/Library/Extensions/kXAudioDriver.kext Thanks. But on further testing it starts degrading after exactly 1 minute, so for now it really can't be used. Link to comment Share on other sites More sharing options...
newbmac Posted August 12, 2008 Share Posted August 12, 2008 Yup, I've mentioned it at DH's bug report page but the thing is that after you reboot, it will not sound from all speakers (only the rear ones) Works great for me. I actually had to restart to get it all to work. For Stereo speaker settings I also switched the channels there so now the sound comes from my front speakers WITHOUT having to change my cabling. I also fixed it for MultiChannel 5.1 so it plays the correct channels from each 5.1 speaker. Front Left 5 Front Right 6 Listening to itunes from my front speakers now, not from back which I assume is correct as this is stereo music and not surround songs. Thanks. But on further testing it starts degrading after exactly 1 minute, so for now it really can't be used. Well I don't have your sound card. What I had to do: First adjust in Audio Midi Setup the settings for the speaker channels. Then restart and at restart I did a -f -v System sound for Adium came from 5.1 and listening to itunes perfectly right now from 2.1 Link to comment Share on other sites More sharing options...
newbmac Posted August 12, 2008 Share Posted August 12, 2008 Ok, just CONFIRMED. I restarted and OS X kept all my speaker settings. If you are not keeping settings, make sure you restart after adjusting the speaker channels and do a -f -v boot. Going to leave the music playing to see if sound goes .... BUG: Sound volume adjustment slider does not work on the apple desktop but does work in iTunes Link to comment Share on other sites More sharing options...
newbmac Posted August 12, 2008 Share Posted August 12, 2008 I've Audigy 2 ZS and OSX does keep the settings (it just doesn't play from front L&R after reboot and continues to play from rear) I've done that channel mapping long back... Did you do the chanel mapping for both multichannel and stereo tabs in the Midi Utility? Well, the sound degrades for me. I just stopped itunes and came back to start it 5 minutes later, sound is all garbled coming out Link to comment Share on other sites More sharing options...
newbmac Posted August 12, 2008 Share Posted August 12, 2008 Known Issue and the workaround also mentioned plenty of times (check my post 1) (also your thread) Yep, got it. Also, in first post is it correct that rear speakers only work? The issue is the channels are not properly mapped and I have 5.1 sound for system sounds. In iTunes music is only 2 channel, so it should not be coming out of 5.1 right? Link to comment Share on other sites More sharing options...
Oxtie Posted August 12, 2008 Author Share Posted August 12, 2008 Yep, got it. Also, in first post is it correct that rear speakers only work? The issue is the channels are not properly mapped and I have 5.1 sound for system sounds. In iTunes music is only 2 channel, so it should not be coming out of 5.1 right? regardless of audio channels in a file, 2.0 shouldn't be playing from the rear but all (specially after setting up channel mappings in Audio midi.app). if its only happening with me, then I'll remove it off... although it is an issue. If you see below 48000 Hz, there are channels and only 1 and 2 are adjustable while "M" and all other channels are grayed and off. (i can assume you don't have this) Standard CT driver in XP plays 2.0 mp3 in all 5.1 not just front or just rear. From my side, Channel test signal noise comes correctly from all right speakers (ofcourse after remapping each of them). Even in kX for XP, I had to use kX Mixer to get all 5.1 working (thanks to Russ@DH for eplog workaround) EDIT: Bed time, will be back asap. Link to comment Share on other sites More sharing options...
newbmac Posted August 13, 2008 Share Posted August 13, 2008 Paypal donations for their project: http://kxproject.lugosoft.com/fund.php?language=en Link to comment Share on other sites More sharing options...
alicizmar Posted August 13, 2008 Share Posted August 13, 2008 Ooooooh, I got a Sound Blaster in my machine begging to be used again (on Realtek ALC889a now). I'll give this a shot. Link to comment Share on other sites More sharing options...
fredun Posted August 13, 2008 Share Posted August 13, 2008 Audio MIDI Setup Audio Output Format: double click to 8ch-16bit sound OK Link to comment Share on other sites More sharing options...
-=n3rd=- Posted August 13, 2008 Share Posted August 13, 2008 Hey Guys, I tried it with my Audigy4 OEM non Pro and it works! The Card is correctly recognized but the sound is very crispy...The hights in my sound are distortioned and it doesn't really sounds that good...Maybe its getting better with future releases. I'll keep the ball. My bigggest dream is that I can use the digital Output with my Coxial Output. I buyed an adaptor which gives me that outputs. I don't no if its possible but I would love to use my digital outputs with osx! Good work so far! Keep on rockin' dudes! Link to comment Share on other sites More sharing options...
Dmitrii Posted August 13, 2008 Share Posted August 13, 2008 Thank you for answer Lama I just plugin jack into other connector. ir receiver won't work on Audigy2 Platinum It will be great solution for FrontRow. Still wait new version Link to comment Share on other sites More sharing options...
MacFanatic76 Posted August 13, 2008 Share Posted August 13, 2008 WOW ! Just saw the thread by accident, when googling around I'm also a member of the suffering Creative-community, having f.e. a Live!-card has always been a pain in the arse for a system othen than WinXP Can't wait to try it out ! THANK YOU !!! Wish you all peps good luck with this ! Greetings Mac OS X 10.5.4 (iDeneb v.1) Modbin kernel 9.4.0 Asus P4C800-E Deluxe, AMI BIOS v.1023 Intel Pentium 4 HT "Prescott'' 2.8 GHz/FSB 800 MHz/1 MB L2 cache Intel 875P MCH/Intel ICH5R Kingston HyperX 2x1 GB DDR 400 MHz Asus V9999 TD (nVidia GeForce 6800), 128 MB/256 bit, Full CI/QE/QGL Link to comment Share on other sites More sharing options...
newbmac Posted August 13, 2008 Share Posted August 13, 2008 Audio MIDI Setup Audio Output Format: double click to 8ch-16bit sound OK Hmm, that makes it mono and not stereo sound I think. Guess that will work, but not ideal. Link to comment Share on other sites More sharing options...
MacFanatic76 Posted August 13, 2008 Share Posted August 13, 2008 Here are the results on a Creative Sound Blaster Live! 5.1 Digital + Creative Inspire 5.1 Sound System : The driver gets loaded by Mac OS X, alert tunes +iTunes songs + HDTV-rips sound work all, with the exception for the driver working normally only from time to time In just a few minutes, the sound starts "crackling", loading/unloading the driver doesn't help much. Although one do can configure the sound output and sound redirection, and that all channels do their work separately, "format"-choice menu is limited to 48 KHz and 8ch-16 bit, which is i think the thingy causing problems to this card specifically. Might be of course something completely other than this If you do not configure a multichannel audio output, but just a stereo, 5.1 output is still working under movies. But, what the hell, one can't expect miracles right at the first stage, right ? The KX group has done something i believe no one has expected, and even with all the mentioned problems, they do deserve the crown ! I am more than sure this initiative will come to its full success in the near future and wish the talented developers all the best in their lives and their work. I find this a GIANT achievement and a very big step forward ! Keep up the good work, support is at hand ! THANX A LOT ! sound_effects.tiff output.tiff input.tiff stereo.tiff 5.1_Multichannel.tiff audio_devices.tiff Link to comment Share on other sites More sharing options...
devilhood Posted August 13, 2008 Share Posted August 13, 2008 Lama, this is great stuff Link to comment Share on other sites More sharing options...
newbmac Posted August 13, 2008 Share Posted August 13, 2008 Does anyone know if Eugene is traveling and won't be able to do another release for a while or not? Link to comment Share on other sites More sharing options...
PuLSaR Posted August 13, 2008 Share Posted August 13, 2008 Tested on Audigy 4 PRO card, it works very well, the sound quality is great, infortunately the sound gets distorted after 5-10 minutes. However, awesome work, it sounds very promising Link to comment Share on other sites More sharing options...
Recommended Posts