pitap Posted July 14, 2010 Share Posted July 14, 2010 Hi everyone, I need a bit of help here, I am intending to have a dual audigy cards setup, but it appears that the driver does not map outputs on both cards instead of just one of them by default. Is there any way I could configure the driver to map the outputs? I hope it is not too difficult. Thanks a lot! Link to comment Share on other sites More sharing options...
dimon2242 Posted July 17, 2010 Share Posted July 17, 2010 Can I run creative x-fi extrememusic? Thank you Link to comment Share on other sites More sharing options...
colik Posted August 13, 2010 Share Posted August 13, 2010 My integrated ALC850 would not peep a sound in my hackintosh whatever I tried thenI found this old soundblaster live! that I haven't used for 10 years in the bottom of a drawer full of refuse electronics and bingo... Some crazy people have made a driver for it ! Thanks a lot, it works like a charm. Link to comment Share on other sites More sharing options...
KOERONE Posted August 21, 2010 Share Posted August 21, 2010 Do y'all think this should work on mdd g4 powermac? Link to comment Share on other sites More sharing options...
Dreamaker Posted September 5, 2010 Share Posted September 5, 2010 Does mic (sound in) works on SB Live! ? Tnx in advance Link to comment Share on other sites More sharing options...
svakak Posted September 5, 2010 Share Posted September 5, 2010 Does mic (sound in) works on SB Live! ? Tnx in advance No Link to comment Share on other sites More sharing options...
Dreamaker Posted September 5, 2010 Share Posted September 5, 2010 No Tnx man fo fast reply. Too bad... Need it for skype (most prefered) & voice record. Is there any sound card with fully support under SL (with quality not lower than SB Live!)? Also can be usb... Tnx again Link to comment Share on other sites More sharing options...
Oxtie Posted September 7, 2010 Author Share Posted September 7, 2010 All right! Those who want to make their 2.0 channel audio sound in all speakers, here is an EASY way! Download SoundFlower (from here as usual for latest http://code.google.com/p/soundflower/ Download SoundFlowerBED-MOD (from this thread for latest http://www.insanelymac.com/forum/index.php?showtopic=230224) From SF-BedMod's menu, Under 2ch, select NONE (OFF) AND Under 16ch, select your card. In Audio Midi setup, use SoundFlower (16ch) and you're DONE! TIP1: You can make soundFlowerBED.APP to automatically start (System Preferences \ Accounts \ Login items tab) EDIT Front page: Removed attachment and replaced with kx project official release link + above info. EDIT Signature: You can find all downloads, release notes, etc on my signature (for shortcut) Link to comment Share on other sites More sharing options...
chipped Posted October 1, 2010 Share Posted October 1, 2010 Will an OEM Audigy 2 ZS work? Sorry if this has been asked already Thanks Link to comment Share on other sites More sharing options...
MacUser2525 Posted October 1, 2010 Share Posted October 1, 2010 Will an OEM Audigy 2 ZS work? Sorry if this has been asked already Thanks The one I have works fine in my backup machine. Link to comment Share on other sites More sharing options...
atoel Posted October 3, 2010 Share Posted October 3, 2010 i'm totally new in hackintosh, already installed iatkos s3v2 (update to 10.6.4) on my p5kc, have a problem with the sound, i'm using creative sb audigy value 7.1, tried install kxaudiodriver both version, 32 and 64 but still no sound, anyone can help me please? or maybe there are addition files to complete installation? extra kext for my audigy value? for spec, u can read here : http://asia.creative.com/products/product....p;listby=system thanks... Link to comment Share on other sites More sharing options...
MacUser2525 Posted October 3, 2010 Share Posted October 3, 2010 i'm totally new in hackintosh, already installed iatkos s3v2 (update to 10.6.4) on my p5kc, have a problem with the sound, i'm using creative sb audigy value 7.1, tried install kxaudiodriver both version, 32 and 64 but still no sound, anyone can help me please? or maybe there are addition files to complete installation? extra kext for my audigy value? for spec, u can read here : http://asia.creative.com/products/product....p;listby=system thanks... That is one of the models that does not have the emu10kX chip on them so it will not work with this driver which is for the cards that do. http://en.wikipedia.org/wiki/Sound_Blaster...26_Audigy_Value Link to comment Share on other sites More sharing options...
atoel Posted October 4, 2010 Share Posted October 4, 2010 That is one of the models that does not have the emu10kX chip on them so it will not work with this driver which is for the cards that do. http://en.wikipedia.org/wiki/Sound_Blaster...26_Audigy_Value is there any solution for this card to run on iatkos? beside kxaudiodriver? Link to comment Share on other sites More sharing options...
MacUser2525 Posted October 4, 2010 Share Posted October 4, 2010 is there any solution for this card to run on iatkos? beside kxaudiodriver? Don't think so if you can find one of the other cards with the correct chip on them then that would be your best bet for an add in sound card working for you. Even a cheap USB sound card should work if you wanted to go that route. Link to comment Share on other sites More sharing options...
atoel Posted October 4, 2010 Share Posted October 4, 2010 thank u so much dude for ur kind help...i think i like to try to enable onboard audio in my p5kc (Realtek ALC883), if it can't run too, i'll think bout ur suggestion, find another card... Link to comment Share on other sites More sharing options...
sninety Posted October 12, 2010 Share Posted October 12, 2010 thanx!!! Link to comment Share on other sites More sharing options...
chipped Posted October 19, 2010 Share Posted October 19, 2010 Thanks mate, Kakewalk + Your drivers = me rocking out, went super smooth Dammit, after about 30 mins, the sound just stopped coming through the sound card. Anyone else have this problem? Link to comment Share on other sites More sharing options...
LowRidinCrew Posted October 27, 2010 Share Posted October 27, 2010 Mines not running smooth, It started to suck I have the front bay in my tower also. anytime I play a song or video it slows down alot. Link to comment Share on other sites More sharing options...
psycmos Posted October 31, 2010 Share Posted October 31, 2010 I have one Audigy 4 Pro and i use Leopard snow 10.6.4 booting in 64 Bits kernel mode and works fine in my case! Sound great and Low Latency in audio processing. Really great thanks to KXproject :D Link to comment Share on other sites More sharing options...
DavidAnberlin Posted November 7, 2010 Share Posted November 7, 2010 Thanx guys for these drivers - audigy 2 zs. Just set up my first hackingtosh(leopard) a few months ago and these drivers have worked great . just switched to sl 10.6.4 32bit and everything works great. I can't imagine the amount of work and dedication that went into making this possible. thanx again. Link to comment Share on other sites More sharing options...
dxellas Posted November 20, 2010 Share Posted November 20, 2010 Well done. Many thanks to the developers. At least my Audigy 2 ZS Platinum Pro is not useless running iATKOS S3v2. What i do miss is that i cannot regulate the volume from the I/O hub. Is it planned in implementing it in future ? Link to comment Share on other sites More sharing options...
Oxtie Posted November 21, 2010 Author Share Posted November 21, 2010 Well done. Many thanks to the developers. At least my Audigy 2 ZS Platinum Pro is not useless running iATKOS S3v2. What i do miss is that i cannot regulate the volume from the I/O hub. Is it planned in implementing it in future ?So far development looks "stopped" SOMEHOW, E started responding... at hardware heaven http://www.hardwareheaven.com/mac-os-x-dri...3b0-beta-2.html Link to comment Share on other sites More sharing options...
dxellas Posted November 21, 2010 Share Posted November 21, 2010 Oh i see. Thanks for letting me know Oxtie. At least allow me to ask here if i would like to install the 1.3b0 drivers, would i have to remove the 1.11b0 ? If so, how can i do that properly ? This question might sound silly but i am very new to OS X. Link to comment Share on other sites More sharing options...
Oxtie Posted November 22, 2010 Author Share Posted November 22, 2010 1.3b0 is for Leopard 10.5.x & Tiger 10.4.x editions (which does not have x64 obviously) and 1.11b0 is for Snow Leopard 10.6.x edition. You install wrong driver on wrong OS, you on your own Link to comment Share on other sites More sharing options...
Juaanjo Posted November 22, 2010 Share Posted November 22, 2010 Hello. It will work well with an IDT card and Snow Leopard 10.6.2? I don´t want to break my system again trying kexts for sound, I don´t manage to do that sound works well. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts