Jump to content

IO80211Family modif 1.0.0


1 Screenshot

About This File

Modified IO80211Family.kext especially who use device based on Atheros40 (the idea came from CtlnaAHCIPort.kext) so we don't need to touch /S/L/E just inject via OpenCore, and we can running Big SUr without open Sealed (no need remove/delete vanilla IO80211Family.kext in /S/L/E)

 

I'm not try in Mojave or Catalina but I'm sure is worked too

 

1. just put 2 kext HS80211Family.kext & AirPortAtheros40.kext  .../OC/Kexts and make sure inject via config.plist

  do not inject IO80211NetBooter in the plist (must do research so i leave there in plugin),  I remove IO80211NetBooter from plugin so as not to confuse

see my pict below just add 2 value

509405553_ScreenShot2020-10-10at10_17_05.png.8100d3f0de3a0564dcb1d943019cc356.png

 

2. you can add value manually VendorID in IONameMatch (atheros40) if your ID not present

 

3. refer to @MaLd0n guide in olarila for working Wifi Atheros AR9565, AR9462, AR9463, AR9485

here is the modification (no need injector)

AR9565 AirPortAtheros40-9565.kext.zip

AR9462 AirPortAtheros40-9462.kext.zip

AR9463 AirPortAtheros40-9463.kext.zip

AR9485 AirPortAtheros40-9485.kext.zip

 

Additional : Fake Locale & Country Code

 

Use this kext WifiLocFix.kext.zip to fix Locale & Country Code (Fake AirPort Location Interface)

 

657559936_ScreenShot2020-10-14at20_39_48.png.e0fd611bc2519555dfd2e1d458aa5744.png

 

You can change it inside WifiLocFix.ket depend on your location

and don't forget to inject in your config.plist

 

 Card Type: AirPort Extreme  (0x168C, 0x3112)

  Firmware Version: Atheros 9380: 4.0.74.0-P2P

  MAC Address: XXXXXXXXXXXXXX

  Locale: ETSI

  Country Code: ID

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64

  Wake On Wireless: Supported

  Status: Connected

 

 


What's New in Version 1.0.0   See changelog

Released

No changelog available for this version.

  • Like 19
  • Thanks 15

User Feedback

Recommended Comments



Please Guide Me. Thanks

 

My Network Card is  Atheros 9380

TP-Link TL-WDN4800 N900 Wireless Dual Band PCI Express Adapter

 

 

Software Versions:

  CoreWLAN: 16.0 (1657)

  CoreWLANKit: 16.0 (1657)

  Menu Extra: 17.0 (1728)

  System Information: 15.0 (1502)

  IO80211 Family: 12.0 (1200.12.2)

  Diagnostics: 11.0 (1163)

  AirPort Utility: 6.3.9 (639.14)

  Interfaces:

en1:

  Card Type: AirPort Extreme  (0x168C, 0x3112)

  Firmware Version: Atheros 9380: 4.0.74.0-P2P

  MAC Address: c0:4a:00:28:11:f5

  Locale: Unknown

  Country Code:

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64

  Wake On Wireless: Supported

  Status: Connected

  Current Network Information:

PAstudios NETWORK:

  PHY Mode: 802.11n

  BSSID: b0:7f:b9:17:40:20

  Channel: 6

  Country Code:

  Network Type: Infrastructure

  Security: WPA2 Personal

  Signal / Noise: -38 dBm / -98 dBm

  Transmit Rate: 144

  MCS Index: 15

 

 

What Should I add here?

 

<key>IONameMatch</key>
<array>
<string>pci168c,32</string>
Edited by iamprabhuantony
  • Like 1
Link to comment
Share on other sites

3 hours ago, iamprabhuantony said:

Please Guide Me. Thanks

 

My Network Card is  Atheros 9380

TP-Link TL-WDN4800 N900 Wireless Dual Band PCI Express Adapter

 

 

Software Versions:

  CoreWLAN: 16.0 (1657)

  CoreWLANKit: 16.0 (1657)

  Menu Extra: 17.0 (1728)

  System Information: 15.0 (1502)

  IO80211 Family: 12.0 (1200.12.2)

  Diagnostics: 11.0 (1163)

  AirPort Utility: 6.3.9 (639.14)

  Interfaces:

en1:

  Card Type: AirPort Extreme  (0x168C, 0x3112)

  Firmware Version: Atheros 9380: 4.0.74.0-P2P

  MAC Address: c0:4a:00:28:11:f5

  Locale: Unknown

  Country Code:

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64

  Wake On Wireless: Supported

  Status: Connected

  Current Network Information:

PAstudios NETWORK:

  PHY Mode: 802.11n

  BSSID: b0:7f:b9:17:40:20

  Channel: 6

  Country Code:

  Network Type: Infrastructure

  Security: WPA2 Personal

  Signal / Noise: -38 dBm / -98 dBm

  Transmit Rate: 144

  MCS Index: 15

 

 

What Should I add here?

 

<key>IONameMatch</key>
<array>
<string>pci168c,32</string>

no need just put 2 kext HSxxxx+atheros40

  • Like 1
Link to comment
Share on other sites

 

2 hours ago, rajuchacharuk said:

can't boot Big Sur with this but can boot Catalina.

 

image0.jpg

ok solved by disabling plugin kext in config.plist which is inside of HSxxxxxxx.kext

Edited by rajuchacharuk
  • Like 2
Link to comment
Share on other sites

2 minutes ago, iamprabhuantony said:

I am getting this on Boot. Please Check this error.

disable IO80211NetBooter.kext in config.plist as mentioned in my above comment

  • Thanks 1
Link to comment
Share on other sites

16 minutes ago, rajuchacharuk said:

disable IO80211NetBooter.kext in config.plist as mentioned in my above comment

Thanks a Lot. it's Working Now!

Screenshot 2020-10-12 at 18.00.53.png

  • Like 2
Link to comment
Share on other sites

36 minutes ago, pico joe said:

@rajuchacharuk, in fact I don't know what relation is, just for make sure there are in the same version, and not load (if load) from the /S/L/E

 

 

 

then please mention in your post to disable plugin kext in config.plist

  • Like 1
Link to comment
Share on other sites

 

would it be possible to work the BCM4322? Big Sur if iio80211family.kext is used in OC I have kernel panic in big sur, catalina works perfectly.

 

thanks

Edited by taga
Link to comment
Share on other sites

6 hours ago, taga said:

 

would it be possible to work the BCM4322? Big Sur if iio80211family.kext is used in OC I have kernel panic in big sur, catalina works perfectly.

 

thanks

 

Link to comment
Share on other sites

I Live in India.  COUNTRY CODE is IN. .
 
<key>IO80211CountryCode</key>
<string>ID</string>
<key>IO80211Locale</key>
<string>ETSI</string>

Screen Shot 2020-10-16 at 12.00.19 PM.png

Edited by iamprabhuantony
Link to comment
Share on other sites

can't I get full tx rate?, I've ar9565 (dw1707)

I only get 300-400kbps downloading speed.

and also wifi network strength is too weak even I've connected two antennas :/

 

 

  Card Type: AirPort Extreme  (0x168C, 0x20E)

  Firmware Version: Atheros 9565: 4.0.74.0-P2P

  MAC Address: xx:xx:xx:xx:xx:xx

  Locale: FCC

  Country Code: IN

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

  Wake On Wireless: Supported

  Status: Connected

Edited by rajuchacharuk
Link to comment
Share on other sites

22 hours ago, pico joe said:

Sorry I can help you, I read in another forums some atheros get weak signal and have no solution

and what about speed?

Link to comment
Share on other sites

Hi, Thanks a lot and worked like charm in both 10.15 & 11

I was wondering if u could do this patch to AppleBCM7510Ethernrt.kext. My lan work on 10.15 with device property but not 10 macOS 11. the kext AppleBCM7510Ethernrt.kext with is present in macOS 11 but it not loading.

 

Thanks again 

Edited by MJKhaani
Link to comment
Share on other sites

Works OOB with my AzurWave AR5891 / NE771. However, I just noticed "Supported PHY Modes: 802.11 a/b/g/n", yet I don't see any 5GHz Wifi.

Catalina 10.15.7 (19H15)

 

Anyway, many thanks!

 

-Heinrich

 

  Card Type: AirPort Extreme  (0x168C, 0x1067)

  Firmware Version: Atheros 9280: 4.0.74.0-P2P

  MAC Address: 00:22:43:84:e4:74

  Locale: Unknown

  Country Code: DE

  Supported PHY Modes: 802.11 a/b/g/n

  Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

  Wake On Wireless: Supported

  Status: Connected

Edited by macfriend123
Link to comment
Share on other sites

Im using AR9285 and after edit plist file wifi work with OpenCore-BigSur/ Catalina. But can't work with Clover-Big Sur/ or Catalina, what should I do, thank?

Link to comment
Share on other sites


×
×
  • Create New...