[pre-release] macOS High Sierra

[Cyberdevs]

 

Thank you! 

You're Welcome

[Ciro82]

Thanks for clover 4081. RX480 works out of the box in high Sierra, no kext, no modifications necessary 

 

You still need an helper card or iGpu primary? 

[Cyberdevs]

You still need an helper card or iGpu primary? 

 

I believe so! unless you use a modified ROM

[asdesoso]

How can I enable audio via AppleHDA on ALC892?

Thanks for your attention.

Cheers.

[Helipilot2]

You still need an helper card or iGpu primary? 

 

Yep IGPU primary is still necessary 

[Kynyo]

Did someone managed to solve AppleACPI error on Haswell with Z87? Still not able to boot.

[Dedox]

Did someone managed to solve AppleACPI error on Haswell with Z87? Still not able to boot.

The end of our Motherboard + CPU?

We have already lost audio (i have to use a USB adapter), let's hope we don't have to change our entire motherboard+cpu+ram!

[Kynyo]

I hope not! Its still a great motherboard with 16MB BIOS chip. Audio its still working using AppleALC alongside Lilu.

[Guest ricoc90]

How can you use nvidia web? Or you update directly from Sierra?

I'm not using Nvidia's web drivers, since there ain't any for 10.13. The GT-710 works OOB 

[MacPato]

my 750 GTX is working OOB, needed Webdrivers for 10.12, so this is good news! 

[GIEBELWALD]

I think it's just wait.

Personally click on install macos an continue then open terminal and do diskutil list for 2 or 3 times because I saw that requires much time to appear all partitions and spontaneously opened install macos then I quit install macos and open disk utility and no more loading disks stuck.

 

This is kind of working for me. With Terminal open and some "diskutil list" I am able to open the "Disk Utility". Also I can open "Install macOS". In "Disk Utility", after a 5+ minutes I can see my Harddisk. But when I try to Erase that Disk nothing happens. It's very slow at that point. In "install macOS" the Disk appears, but is grayed out.

 

I use Clover r4081 with afps.efi inside UEFI64 folder. CPU is a Devils Canyon on GA-Z97-D3H. 

 

Any Ideas?

[cecekpawon]

Ozmosis users please share your experience here http://www.insanelymac.com/forum/topic/291655-ozmosis/page-235?do=findComment&comment=2437535

[Matthew82]

 

Hi, I don't know whether this is somewhat off-topic, if so, feel free to contact me and delete the post.

 

As for XCPM for unsupported CPUs patches of 10.13, please try this one:

 

1) Patch for _cpuid_set_info:

The disassembled code looks like this:

ffffff80003a1326	8a 05 21 5d 75 00 	movb	0x755d21(%rip), %al
ffffff80003a132c	04 72 	addb	$0x72, %al
ffffff80003a132e	3c d0 	cmpb	$-0x30, %al
ffffff80003a1330	77 50 	ja	0xffffff80003a1382

Alright, so that add is what we want to patch, and it's only needed for Broadwell-E CPUs, the patch will be:

5d 75 00 04 72 3c d0 77 50 0f b6 c0
to
5d 75 00 04 6a 3c d0 77 50 0f b6 c0

2) Patch for _xcpm_bootstrap:

The disassembled code looks like this:

ffffff80003d08c3	89 d8 	movl	%ebx, %eax
ffffff80003d08c5	04 c4 	addb	$-0x3c, %al
ffffff80003d08c7	3c 22 	cmpb	$0x22, %al
ffffff80003d08c9	77 22 	ja	0xffffff80003d08ed

And the patch will be:

89 d8 04 c4 3c 22 77 22
to
89 d8 04 xx 3c 22 77 22

Note: The xx is your exact platform CPUID, for example, the default one is 0x3C and I want it to be Ivy Bridge which is 0x3A, and the desired patch is:

89 d8 04 c4 3c 22 77 22
to
89 d8 04 c6 3c 22 77 22

3) Instant reboot fix

Look at these ones:

ffffff80003d107e	48 8d 3d 9b e1 65 00 	leaq	_xcpm_pkg_scope_msrs(%rip), %rdi
ffffff80003d1085	be 07 00 00 00 	movl	$0x7, %esi
ffffff80003d108a	31 d2 	xorl	%edx, %edx
ffffff80003d108c	e8 8f fc ff ff 	callq	0xffffff80003d0d20
ffffff80003d1091	83 fb 00 	cmpl	$0x0, %ebx
ffffff80003d1094	74 05 	je	0xffffff80003d109b
ffffff80003d1096	45 20 e5 	andb	%r12b, %r13b
ffffff80003d1099	74 13 	je	0xffffff80003d10ae
ffffff80003d109b	48 8d 3d ce e2 65 00 	leaq	_xcpm_core_scope_msrs(%rip), %rdi
ffffff80003d10a2	be 03 00 00 00 	movl	$0x3, %esi
ffffff80003d10a7	31 d2 	xorl	%edx, %edx
ffffff80003d10a9	e8 72 fc ff ff 	callq	0xffffff80003d0d20
ffffff80003d10ae	48 8d 3d 4b e3 65 00 	leaq	_xcpm_SMT_scope_msrs(%rip), %rdi
ffffff80003d10b5	be 0b 00 00 00 	movl	$0xb, %esi
ffffff80003d10ba	31 d2 	xorl	%edx, %edx
ffffff80003d10bc	e8 5f fc ff ff 	callq	0xffffff80003d0d20

Alright, so the patches will be:

# _xcpm_SMT_scope_msrs
be 0b 00 00 00 5d e9 08 00 00 00 -> be 0b 00 00 00 5d c3 90 90 90 90
and
be 0b 00 00 00 31 d2 e8 5f fc ff ff -> be 0b 00 00 00 31 d2 90 90 90 90 90

# _xcpm_core_scope_msrs
be 03 00 00 00 31 d2 e8 72 fc ff ff -> be 03 00 00 00 31 d2 90 90 90 90 90

# _xcpm_pkg_scope_msrs
be 07 00 00 00 31 d2 e8 8f fc ff ff -> be 07 00 00 00 31 d2 90 90 90 90 90

And if you want to disable the calls/jumps entirely, you should ret this offset:

ffffff80003d0d20	55 	pushq	%rbp  // Change this '55' to 'c3'

The patch is:

BE 0B 00 00 00 5D E9 08 00 00 00 0F 1F 84 00 00 00 00 00 55 48 89 E5 41 57 -> BE 0B 00 00 00 5D E9 08 00 00 00 0F 1F 84 00 00 00 00 00 C3 48 89 E5 41 57

PMheart Can you convert this patch for 6850k for New Sierra? 

 

10.12 Broadwell-E CPUID Patch

83C0E9 > 83C0E1

 

10.12 xcpm_bootstrap

83C3C483 FB22 > 83C3BC83 FB22

 

(wrsmr fix to get CPU max) © okrasit

89D8C1E0 08B99901 > B8003000 00B99901 

 

And for NVM disk external icon fix

 

external for 12.3

4885C074 07808B08 01000010 > 90909090 90808B08 01000010 

 

Everything is working very good, stable. Cpu is working very good on idle mode and in benchmark mode  

 

Biut XCMP not working 

 

But X86PlatformPlugin is loading together with AICP 

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x9951aa7158d (292 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-6850K CPU @ 3.60GHz

Processor Signature..................... : 0x406F1
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 1
 - Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x24
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3812400
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x24 (3600 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x403
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 0 (disabled/unsupported)
 - C1 State Auto Demotion............... : 0 (disabled/unsupported)
 - C3 State Undemotion.................. : 0 (disabled/unsupported)
 - C1 State Undemotion.................. : 0 (disabled/unsupported)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0xAFFBD282F5
IA32_APERF.......................(0xE8)  : 0xA8EF404238
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x2DA500002C00
------------------------------------------
 - Current Performance State Value...... : 0x2C00 (4400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
 - Target performance State Value....... : 0x2C00 (4400 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88380000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 56
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x25252C2C2C2C2C2C
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C02.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C03.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C04.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C05.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C06.......... : 2C (4400 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
 - Package Power Limit #1............... : 4095 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 4095 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x502C8C
------------------------------------------
 - Total Energy Consumed................ : 320 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1700460
------------------------------------------
 - Thermal Spec Power................... : 140 Watt
 - Minimum Power........................ : 0
 - Maximum Power........................ : 0
 - Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x995215DDD4B

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 36 (3600 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 38 44 ]
CPU P-States [ (12) 34 38 44 ]
CPU P-States [ (12) 34 37 38 44 ]
CPU P-States [ (12) 14 34 37 38 44 ]
CPU P-States [ (12) 14 34 37 38 41 44 ]
CPU P-States [ (12) 14 27 34 37 38 41 44 ]
CPU P-States [ (12) 14 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 21 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 17 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 16 17 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 16 17 18 20 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 20 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 25 26 27 34 37 38 41 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 (24) 25 26 27 34 37 38 41 44 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 41 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 41 42 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 40 41 42 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 40 41 42 43 (44) ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 37 38 39 40 41 42 43 44 ]

ThankYou for your help

 

edit:

I made change in patch:

 

89d804c4 3c227722 > 89d804c3 3c227722  (C3) and XCMP working  

[Riley Freeman]

For audio AppleALC is working fine on my laptop for ALC269. Just add -alcbeta and -lilubeta to boot args.

 

Does anyone else with a PS2 trackpad have a blank Trackpad prefpane? It the same as with early Sierra, a fixed VoodooPS2Trackpad is needed.

[wern apfel]

Did someone managed to solve AppleACPI error on Haswell with Z87? Still not able to boot.

You can try to drop MATS, that solves the panic for me.

 

 

 

 

For those who can't bypass the Firmware check, open the InstallESD.dmg @Sierra and install the Core.pkg from the Packages folder to your desired drive on a free partition, after it is done copy the boot.efi from BaseSystem.dmg /System/Library/CoreServices to the drive you've installed HighSierra to /System/Library/CoreServices and reboot. After successful start you can install your preferred language.

[codelaie]

You can try to drop MATS, that solves the panic for me.

tables_dropping.png

 

 

Wow, thanks a lot!

It's working for me on my i7-4790 and I'm currently installing it on a AFPS drive. Will update when it was successful 

 

EDIT: Installation successful, boot from AFPS successful, no ACPI panic.

Edited June 7, 2017 by adfod

[ammoune78]

Remove installation files and try again

 

where's the path for the installation files that can be removed? 

[Guest ricoc90]

where's the path for the installation files that can be removed? 

You need to remove the installation files that the installer wrote to your install destination. 

[macq]

hi ,I was able to install on an external usb drive from the macappstore installer using the latest clover 4081,  installer took a lot of time specially towards the end with 1-2 min remaining (looked like hung up), but then finished, booted to desktop, with similar problems like Sierra,

trackpad preference empty, no wi fi , module not recognised. etc.

 

Strange thing is that I can't make a usb installer from within Sierra, it just ends up putting the installer on the usb but that is not bootable.

can some one help me with this,

 

Also is the wi fi module working for anyone on laptop.

Thanks.

specs in signature

 

PS: can e we have apfs on standard hard disk using the driver in clover/uefi or is it strictly for ssd.

[PMheart]

PMheart Can you convert this patch for 6850k for New Sierra? 

 

10.12 Broadwell-E CPUID Patch

83C0E9 > 83C0E1

 

10.12 xcpm_bootstrap

83C3C483 FB22 > 83C3BC83 FB22

 

(wrsmr fix to get CPU max) © okrasit

89D8C1E0 08B99901 > B8003000 00B99901 

 

And for NVM disk external icon fix

 

external for 12.3

4885C074 07808B08 01000010 > 90909090 90808B08 01000010 

 

Everything is working very good, stable. Cpu is working very good on idle mode and in benchmark mode Zrzut ekranu 2017-06-07 o 13.57.37.png Zrzut ekranu 2017-06-07 o 13.58.45.png

 

Biut XCMP not working 

Zrzut ekranu 2017-06-07 o 13.13.24.png

 

But X86PlatformPlugin is loading together with AICP Zrzut ekranu 2017-06-07 o 13.55.22.pngZrzut ekranu 2017-06-07 o 13.55.11.png

AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved
enableHWP................................: 0

Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x9951aa7158d (292 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-6850K CPU @ 3.60GHz

Processor Signature..................... : 0x406F1
------------------------------------------
 - Family............................... : 6
 - Stepping............................. : 1
 - Model................................ : 0x4F (79)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0x24
------------------------------------------
 - Core Count........................... : 6
 - Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3812400
------------------------------------------
 - Maximum Non-Turbo Ratio.............. : 0x24 (3600 MHz)
 - Ratio Limit for Turbo Mode........... : 1 (programmable)
 - TDP Limit for Turbo Mode............. : 1 (programmable)
 - Low Power Mode Support............... : 1 (LPM supported)
 - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
 - Maximum Efficiency Ratio............. : 12
 - Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x403
------------------------------------------
 - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
 - CFG Lock............................. : 0 (MSR not locked)
 - C3 State Auto Demotion............... : 0 (disabled/unsupported)
 - C1 State Auto Demotion............... : 0 (disabled/unsupported)
 - C3 State Undemotion.................. : 0 (disabled/unsupported)
 - C1 State Undemotion.................. : 0 (disabled/unsupported)
 - Package C-State Auto Demotion........ : 0 (disabled/unsupported)
 - Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
 - LVL_2 Base Address................... : 0x414
 - C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0xAFFBD282F5
IA32_APERF.......................(0xE8)  : 0xA8EF404238
MSR_0x150........................(0x150) : 0x0

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x2DA500002C00
------------------------------------------
 - Current Performance State Value...... : 0x2C00 (4400 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0x2C00
------------------------------------------
 - Target performance State Value....... : 0x2C00 (4400 MHz)
 - Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88380000
------------------------------------------
 - Thermal Status....................... : 0
 - Thermal Log.......................... : 0
 - PROCHOT # or FORCEPR# event.......... : 0
 - PROCHOT # or FORCEPR# log............ : 0
 - Critical Temperature Status.......... : 0
 - Critical Temperature log............. : 0
 - Thermal Threshold #1 Status.......... : 0
 - Thermal Threshold #1 log............. : 0
 - Thermal Threshold #2 Status.......... : 0
 - Thermal Threshold #2 log............. : 0
 - Power Limitation Status.............. : 0
 - Power Limitation log................. : 0
 - Current Limit Status................. : 0
 - Current Limit log.................... : 0
 - Cross Domain Limit Status............ : 0
 - Cross Domain Limit log............... : 0
 - Digital Readout...................... : 56
 - Resolution in Degrees Celsius........ : 1
 - Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
 - Fast-Strings......................... : 1 (enabled)
 - FOPCODE compatibility mode Enable.... : 0
 - Automatic Thermal Control Circuit.... : 1 (enabled)
 - Split-lock Disable................... : 0
 - Performance Monitoring............... : 1 (available)
 - Bus Lock On Cache Line Splits Disable : 0
 - Hardware prefetch Disable............ : 0
 - Processor Event Based Sampling....... : 0 (PEBS supported)
 - GV1/2 legacy Enable.................. : 0
 - Enhanced Intel SpeedStep Technology.. : 1 (enabled)
 - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
 - Adjacent sector prefetch Disable..... : 0
 - CFG Lock............................. : 0 (MSR not locked)
 - xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x640A00
------------------------------------------
 - Turbo Attenuation Units.............. : 0 
 - Temperature Target................... : 100
 - TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x402000
------------------------------------------
 - EIST Hardware Coordination........... : 0 (hardware coordination enabled)
 - Energy/Performance Bias support...... : 1
 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
 - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x25252C2C2C2C2C2C
------------------------------------------
 - Maximum Ratio Limit for C01.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C02.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C03.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C04.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C05.......... : 2C (4400 MHz) 
 - Maximum Ratio Limit for C06.......... : 2C (4400 MHz) 

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
 - Bi-Directional Processor Hot..........: 1 (enabled)
 - C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
 - Power Units.......................... : 3 (1/8 Watt)
 - Energy Status Units.................. : 14 (61 micro-Joules)
 - Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8
------------------------------------------
 - Package Power Limit #1............... : 4095 Watt
 - Enable Power Limit #1................ : 1 (enabled)
 - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
 - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
 - Package Power Limit #2............... : 4095 Watt
 - Enable Power Limit #2................ : 1 (enabled)
 - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
 - Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
 - Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x502C8C
------------------------------------------
 - Total Energy Consumed................ : 320 Joules (Watt = Joules / seconds)

MSR_PKG_POWER_INFO...............(0x614) : 0x1700460
------------------------------------------
 - Thermal Spec Power................... : 140 Watt
 - Minimum Power........................ : 0
 - Maximum Power........................ : 0
 - Maximum Time Window.................. : 0

MSR_PP0_POWER_LIMIT..............(0x638) : 0x0

MSR_PP0_ENERGY_STATUS............(0x639) : 0x0

MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0

MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0x995215DDD4B

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 36 (3600 MHz)
Maximum Turbo Ratio/Frequency............: 44 (4400 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 38 44 ]
CPU P-States [ (12) 34 38 44 ]
CPU P-States [ (12) 34 37 38 44 ]
CPU P-States [ (12) 14 34 37 38 44 ]
CPU P-States [ (12) 14 34 37 38 41 44 ]
CPU P-States [ (12) 14 27 34 37 38 41 44 ]
CPU P-States [ (12) 14 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 21 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 17 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 16 17 18 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 16 17 18 20 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 20 21 25 26 27 34 37 38 41 44 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 25 26 27 34 37 38 41 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 (24) 25 26 27 34 37 38 41 44 ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 41 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 41 42 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 40 41 42 (44) ]
CPU P-States [ 12 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 40 41 42 43 (44) ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 37 38 39 40 41 42 43 44 ]
CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 37 38 39 40 41 42 43 44 ]

ThankYou for your help

 

edit:

I made change in patch:

 

89d804c4 3c227722 > 89d804c3 3c227722  (C3) and XCMP working  Zrzut ekranu 2017-06-07 o 14.46.28.png

Hi, according to your edit, your XCPM should be fine now, and I won't help this.

 

As for wrmsr fix, I doubt whether it's really necessary, but if you need it indeed, here is the new patch:

89 D8 C1 E0 08 48 63 D0 -> B8 00 30 00 00 48 63 D0

As for NVMe kext... Sorry, it's unfortunate that I don't have such binary. (I myself haven't downloaded the installer yet) So could you please give me one? (Gather it from /System/Library/Extensions/IONVMeFamily.kext/Contents/MacOS/IONVMeFamily)

 

EDIT: See here for the new patch.

[gengik84]

As for NVMe kext... Sorry, it's unfortunate that I don't have such binary. (I myself haven't downloaded the installer yet) So could you please give me one? (Gather it from /System/Library/Extensions/IONVMeFamily.kext/Contents/MacOS/IONVMeFamily)

here...IONVMeFamily.zip

[PMheart]

here...IONVMeFamily.zip

Thanks, I've got it from a friend of mine!

[gengik84]

Someone has news about AirPortBrcm4360 whitelist patch for 10.13?

[PMheart]

@Matthew82

 

Hi, this is the external patch for 10.13 DP1.

48 85 C0 74 07 80 8B 20 -> 48 85 C0 66 90 80 8B 20

Someone has news about AirPortBrcm4360 whitelist patch for 10.13?

Hi, I may help, and firstly could you post the patch for 10.12 and the new binary of AirPortBrcm4360 of 10.13?

[SavageAUS]

 

 

All in order with fresh Clover adjustments. Thanks guys (especially PMHeart, Sherlocks, savvamitrofanov ).

 

Once I updated the Clover boot files and added the new masks, installation went through totally smoothly.

 

E6230_i5-3340M_HD4000.jpg

Can you please point me to the Clover boot files and new masks you mentioned?

 

 

 

Sent from my SM-G930F using Tapatalk